Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de HVAC y manejo de aire para salas limpias
Unidad de control de precisión de temperatura y humedad
A close-control air-conditioning unit that coordinates cooling, reheat, humidification and airflow to hold stable cleanroom temperature and moisture conditions.
- Coordinated Cooling and Reheat
- Stable Humidity Control
- Modulating Airflow
- Remote Monitoring Ready
Introducción del producto
The precision temperature and humidity control unit responds to small thermal and moisture changes that conventional comfort equipment may ignore. A modulating cooling stage removes sensible heat and moisture, reheat prevents overcooling during dehumidification, and humidification adds controlled moisture during dry conditions. Direct-drive fans maintain airflow through filter loading, while separate temperature and humidity sensors support stable control. The unit is suited to laboratories, metrology rooms and clean processes with narrow operating bands.
Características clave
Modulating valves, inverter compressors or staged circuits provide finer response than simple on-off control.
Remote supply and return sensors can distinguish room conditions from local unit casing effects.
Trendable alarms for temperature, humidity, airflow and filter loading support early intervention.
Preocupaciones del producto del cliente
Tight environmental control requires all heating, cooling, humidifying and airflow functions to respond as one system rather than as independent devices.
Dehumidification lowers room temperature below the operating band.Modulating reheat offsets the sensible cooling remaining after moisture removal.
Oversized on-off cooling cycles cause repeated humidity swings.Variable or staged capacity matches smaller loads and reduces short cycling.
A sensor near the supply outlet does not represent the controlled workspace.Remote room sensors and averaged feedback are positioned at representative locations.
Filter loading changes airflow and alters coil moisture removal.Fan-speed control maintains airflow while differential-pressure monitoring signals service need.
Aplicaciones típicas
Metrology and calibration roomsPharmaceutical laboratoriesMedical-device inspectionElectronics test cleanroomsStability and environmental rooms
Parámetros técnicos
Typical insulated casing construction for a precision environmental control unit is listed below.
| Materiales Core | Closed-cell polyurethane insulation in thermally separated equipment panels |
|---|---|
| Panel de espesor | 40–60 mm insulated casing panel |
| Ancho efectivo | 700–2200 mm nominal unit width |
| Longitud máxima | Up to 4500 mm overall equipment length |
| Acero frente a espesor | 0.6–1.0 mm coated steel casing skins |
| Densidad Core | 40–45 kg/m³ closed-cell polyurethane |
| Conductividad térmica | 0.023–0.026 W/(m·K) for precision-unit casing insulation |
| Superficie acabada | Textured powder-coated exterior with galvanized or stainless internal wet-section surfaces |
| Tipo conjunto | Gasketed equipment panels with sealed coil section and flexible supply/return connections |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Chilled-water or inverter DX coolingElectric, hot-water or hot-gas reheatSteam or electrode humidifierDuty/standby fan or refrigeration circuit arrangement
Planning a Precision Temperature and Humidity Control Unit specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
