Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Puertas de sala limpia, ventanas y sistemas de bloqueo
Panel de visión de sala limpia resistente al fuego por
A flush specialist glazing assembly combining fire-resisting glass, protective outer panes and a concealed metal frame for observation openings in fire-resisting cleanroom walls.
- Specialist Fire-Glass Core
- Flush Protective Outer Panes
- Concealed Steel Subframe
- Assembly-Based Configuration
Introducción del producto
The fire-resistant vision panel is built as a complete glazing-and-frame assembly rather than by substituting a pane into a standard cleanroom window. A specialist fire-glass layer is protected by toughened outer panes, retained within a steel or stainless-steel subframe and finished flush to the cleanroom surfaces. Glass type, edge cover, seal materials, opening size and wall construction are selected together so the supplied configuration can match the documented fire strategy without sacrificing cleanability.
Características clave
A concealed metal subframe supports the heavier glazing stack and maintains defined edge cover.
Screen-printed borders hide fire-compatible seals and mechanical retention from the room face.
Mullions and alternative glazing makeups allow the assembly to address different opening sizes and insulation needs.
Preocupaciones del producto del cliente
Fire performance depends on the complete wall, frame, seal and glazing construction, while the cleanroom-facing surfaces must remain flush and accessible for cleaning.
A standard vision pane can become the weakest point in a fire-resisting partition.The opening uses a purpose-designed fire-glass stack and retained subframe matched to the intended wall construction.
Fire-compatible retainers often project into the clean area.Protective outer panes and opaque borders conceal the retention system behind flush room faces.
Large openings increase glass weight and edge stress.Opening dimensions, mullions and frame support are selected with the specific glazing makeup rather than treated as a standard window size.
Aplicaciones típicas
Fire-resisting pharmaceutical corridorsLaboratory compartment wallsHospital clean-area boundariesHazardous process observation points
Parámetros técnicos
The ranges below describe common cleanroom fire-vision constructions; any declared fire performance applies only to the corresponding documented assembly.
| Materiales Core | Specialist clear fire-resistant glass protected by toughened safety-glass outer panes |
|---|---|
| Panel de espesor | 30–70 mm glazing stack; typically 75–150 mm overall frame depth |
| Ancho efectivo | 300–1200 mm clear viewing width for common single-light assemblies |
| Longitud máxima | 2400 mm overall window height, subject to the selected documented construction |
| Acero frente a espesor | 1.2–2.0 mm stainless or galvanized-steel subframe and liners |
| Densidad Core | Configuration-dependent multi-layer glass; typically 2500–3000 kg/m³ |
| Conductividad térmica | Approximately 0.3–1.0 W/(m·K), depending on the selected fire-glass composition |
| Superficie acabada | Flush clear toughened outer glass with bonded ceramic-frit border and brushed stainless trim |
| Tipo conjunto | Mechanically retained fire-glass assembly with fire-compatible seals and concealed subframe |
| Customization | Disponible según la aplicación prevista y el entorno operativo |
Opciones disponibles
Integrity-only or insulated glazing makeup304 or 316 stainless-steel trimMullioned larger openingIntegral blind where compatible
Planning a Fire-Resistant Cleanroom Vision Panel specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
