Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Accesorios de instalación de sala limpia
Sala limpia Panel Clamp
A reusable stainless-steel bridge clamp that holds adjacent sandwich-panel edges in alignment while their joint is fixed and sealed.
- Reusable Installation Tool
- Opposed Edge Jaws
- Threaded Force Control
- No Permanent Face Fixing
Introducción del producto
The cleanroom panel clamp is an external installation tool with opposed formed jaws and a threaded adjuster. The jaws bear on protected panel edges while the screw draws adjacent sandwich panels into a stable working position. Installers can therefore check face alignment, close the joint and complete concealed fixing before removing the clamp, without leaving the tool as part of the finished enclosure.
Características clave
A coarse threaded adjuster provides progressive, controllable closing force during alignment.
Stainless construction tolerates repeated handling and can be cleaned between installation areas.
Replaceable contact pads or protected jaw faces can reduce marking on coated steel skins.
Preocupaciones del producto del cliente
Lightweight insulated panels can move or develop a face step before concealed joint hardware and sealant have secured the assembly.
Two panel faces drift out of plane while the concealed fixing is tightened.The bridge clamp holds both edges against a common jaw position during fastening.
Uncontrolled leverage can dent thin coated-steel facings.Threaded adjustment applies force gradually, with jaw pads selected for the facing finish.
Temporary screws leave holes that require hygienic repair.External jaws grip removable edge locations without adding permanent face penetrations.
Different panel thicknesses make a fixed-gap tool impractical.Jaw reach, bridge width and screw travel can be matched to the installed panel system.
Aplicaciones típicas
Cleanroom wall-panel erectionCeiling panel edge alignmentModular enclosure assemblyJoint sealing preparationDoor and window infill installation
Parámetros técnicos
Typical construction ranges for a reusable stainless cleanroom sandwich-panel alignment clamp are listed below.
| Materiales Core | 304 stainless-steel bridge, opposed formed jaws and threaded adjuster |
|---|---|
| Panel de espesor | 50-150 mm compatible sandwich-panel thickness |
| Ancho efectivo | 60-240 mm adjustable jaw span |
| Longitud máxima | Up to 500 mm overall clamp bridge length |
| Acero frente a espesor | 2.00-6.00 mm structural clamp component thickness |
| Densidad Core | Approximately 7900-8000 kg/m³ for stainless-steel components |
| Conductividad térmica | Approximately 14-17 W/(m·K) for austenitic stainless steel |
| Superficie acabada | Brushed or bead-blasted stainless steel with optional non-marking jaw pads |
| Tipo conjunto | Removable opposed-jaw bridge clamp with threaded mechanical adjustment |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
304 or 316 stainless steelSoft polymer jaw padsHex-bolt or hand-knob adjustmentCustom jaw reach and span
Planning a Cleanroom Panel Clamp specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
