Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Accessoires d'installation Cleanroom
Cleanroom Panel Clamp par
A reusable stainless-steel bridge clamp that holds adjacent sandwich-panel edges in alignment while their joint is fixed and sealed.
- Reusable Installation Tool
- Opposed Edge Jaws
- Threaded Force Control
- No Permanent Face Fixing
Introduction de produit
The cleanroom panel clamp is an external installation tool with opposed formed jaws and a threaded adjuster. The jaws bear on protected panel edges while the screw draws adjacent sandwich panels into a stable working position. Installers can therefore check face alignment, close the joint and complete concealed fixing before removing the clamp, without leaving the tool as part of the finished enclosure.
Key Features
A coarse threaded adjuster provides progressive, controllable closing force during alignment.
Stainless construction tolerates repeated handling and can be cleaned between installation areas.
Replaceable contact pads or protected jaw faces can reduce marking on coated steel skins.
Préoccupations du client produit
Lightweight insulated panels can move or develop a face step before concealed joint hardware and sealant have secured the assembly.
Two panel faces drift out of plane while the concealed fixing is tightened.The bridge clamp holds both edges against a common jaw position during fastening.
Uncontrolled leverage can dent thin coated-steel facings.Threaded adjustment applies force gradually, with jaw pads selected for the facing finish.
Temporary screws leave holes that require hygienic repair.External jaws grip removable edge locations without adding permanent face penetrations.
Different panel thicknesses make a fixed-gap tool impractical.Jaw reach, bridge width and screw travel can be matched to the installed panel system.
Les applications typiques
Cleanroom wall-panel erectionCeiling panel edge alignmentAssemblée modulaire Enclosure
parJoint sealing preparationDoor and window infill installation
Paramètres techniques
Typical construction ranges for a reusable stainless cleanroom sandwich-panel alignment clamp are listed below.
| Matériaux de base | 304 stainless-steel bridge, opposed formed jaws and threaded adjuster |
|---|---|
| Panneau épaisseur | 50 - 150 mm épaisseur de panneau sandwich compatible par |
| Largeur effective | 60-240 mm adjustable jaw span |
| Longueur maximale | Up to 500 mm overall clamp bridge length |
| Acier face épaisseur | 2.00-6.00 mm structural clamp component thickness |
| Densité Core | Approximately 7900-8000 kg/m³ for stainless-steel components |
| Conductivité thermique | Environ 14 - 17 W / (m · K) pour l'acier inoxydable austénitique par |
| surface finie | Brushed or bead-blasted stainless steel with optional non-marking jaw pads |
| Type joint | Removable opposed-jaw bridge clamp with threaded mechanical adjustment |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
304 or 316 stainless steelSoft polymer jaw padsHex-bolt or hand-knob adjustmentCustom jaw reach and span
Planning a Cleanroom Panel Clamp specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
