Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de flujo laminar y contención
Gabinete de Seguridad Biológica Clase III por
A closed gas-tight biological safety glovebox that separates the operator from the work through fixed gloves, negative pressure and controlled transfer ports.
- Gas-Tight Stainless Chamber
- Fixed Glove and Sleeve Ports
- Negative-Pressure Operation
- Controlled Double-Door Transfer
Introducción del producto
The Class III cabinet is a fully enclosed stainless steel glovebox operated under negative pressure. Manipulation is performed through fixed glove and sleeve assemblies rather than an open front sash. Materials enter through an interlocked double-door pass chamber or other sealed transfer interface, and exhaust air passes through high-efficiency filtration before connection to the facility exhaust. Welded chamber seams, pressure monitoring and glove integrity management form the physical containment boundary.
Características clave
Replaceable glove and sleeve assemblies support manipulation without opening the cabinet.
A double-door transfer chamber controls material entry and removal.
Negative pressure directs any inward leakage toward the filtered exhaust.
Pressure-hold and glove-integrity connections support routine barrier checks.
Preocupaciones del producto del cliente
A gas-tight glovebox depends on every welded seam, glove port, transfer door and exhaust connection remaining part of one controlled barrier.
Opening the main chamber would break the containment boundary.A double-door transfer chamber moves materials without opening the operator workspace.
Gloves are the most frequently stressed barrier component.Replaceable port rings and integrity-test connections support routine glove management.
A positive leak could release chamber air.Negative pressure directs leakage inward toward the filtered exhaust.
Internal corners are difficult to decontaminate.Welded radiused stainless geometry reduces inaccessible crevices.
Aplicaciones típicas
High-risk biological researchContained pathogen manipulationSpecialized animal or sample processingClosed biological procedure development
Parámetros técnicos
Typical configurable construction ranges for a Class III biological safety cabinet are listed below.
| Materiales Core | Fully welded SUS316L chamber with laminated safety-glass viewing panel and butyl or CSM glove assemblies |
|---|---|
| Panel de espesor | 40-80 mm double-skin chamber and service sections |
| Ancho efectivo | 1200-3000 mm usable glovebox width |
| Longitud máxima | Up to 4000 mm overall chamber length |
| Acero frente a espesor | 2.0-3.0 mm welded SUS316L chamber shell |
| Densidad Core | Approximately 8000 kg/m³ for SUS316L chamber material |
| Conductividad térmica | 14-16 W/(m·K) for austenitic stainless steel |
| Superficie acabada | Electropolished SUS316L interior with radiused welded corners |
| Tipo conjunto | Continuously welded pressure-tight chamber with sealed glove rings, double-door transfer hatch and flanged exhaust |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Two to eight glove positionsPass-through autoclave interfaceDunk tank or rapid transfer portIntegrated pressure-hold test connections
Planning a Class III Biological Safety Cabinet specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
