Class III biological safety cabinet with welded glovebox chamber

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

클래스 III 생물 안전 캐비닛

A closed gas-tight biological safety glovebox that separates the operator from the work through fixed gloves, negative pressure and controlled transfer ports.

Gas-Tight Stainless Chamber
Fixed Glove and Sleeve Ports
Negative-Pressure Operation
Controlled Double-Door Transfer

견적 요청 제품 찾아보기

상품 소개

The Class III cabinet is a fully enclosed stainless steel glovebox operated under negative pressure. Manipulation is performed through fixed glove and sleeve assemblies rather than an open front sash. Materials enter through an interlocked double-door pass chamber or other sealed transfer interface, and exhaust air passes through high-efficiency filtration before connection to the facility exhaust. Welded chamber seams, pressure monitoring and glove integrity management form the physical containment boundary.

주요 기능

A welded gas-tight chamber provides complete physical separation from the operator.

Replaceable glove and sleeve assemblies support manipulation without opening the cabinet.

A double-door transfer chamber controls material entry and removal.

Negative pressure directs any inward leakage toward the filtered exhaust.

Pressure-hold and glove-integrity connections support routine barrier checks.

고객 제품 관심사

A gas-tight glovebox depends on every welded seam, glove port, transfer door and exhaust connection remaining part of one controlled barrier.

Opening the main chamber would break the containment boundary.A double-door transfer chamber moves materials without opening the operator workspace.

Gloves are the most frequently stressed barrier component.Replaceable port rings and integrity-test connections support routine glove management.

A positive leak could release chamber air.Negative pressure directs leakage inward toward the filtered exhaust.

Internal corners are difficult to decontaminate.Welded radiused stainless geometry reduces inaccessible crevices.

일반적인 응용 프로그램

High-risk biological researchContained pathogen manipulationSpecialized animal or sample processingClosed biological procedure development

기술 매개변수

Typical configurable construction ranges for a Class III biological safety cabinet are listed below.

핵심 재료	Fully welded SUS316L chamber with laminated safety-glass viewing panel and butyl or CSM glove assemblies
패널 두께	40-80 mm double-skin chamber and service sections
유효 폭	1200-3000 mm usable glovebox width
최대 길이	Up to 4000 mm overall chamber length
강철 면면 두께	2.0-3.0 mm welded SUS316L chamber shell
코어 밀도	Approximately 8000 kg/m³ for SUS316L chamber material
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) 오스테나이트 스테인레스 스틸
표면 마무리	Electropolished SUS316L interior with radiused welded corners
접합 유형	Continuously welded pressure-tight chamber with sealed glove rings, double-door transfer hatch and flanged exhaust
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Two to eight glove positionsPass-through autoclave interfaceDunk tank or rapid transfer portIntegrated pressure-hold test connections

Planning a Class III Biological Safety Cabinet specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.