Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Amber Cleanroom Luz
A sealed cleanroom fixture using native amber LEDs to limit short-wavelength exposure in photosensitive process areas.
- Native Amber LED Source
- Low Blue-Light Output
- Sealed Cleanroom Housing
- Distinct Yellow Visual Cue
Introducción del producto
This luminaire replaces a white phosphor source and colored sleeve with LEDs that emit principally in the amber region. The controlled spectrum is used where photoresists, films or light-sensitive materials must be handled under reduced blue and near-UV energy. The fixture retains the same gasketed white housing and smooth optical face used for general cleanroom lighting, while amber lenses or indicators clearly distinguish the circuit.
Características clave
The narrow spectrum reduces unwanted short-wavelength energy at the work surface.
A sealed optical chamber protects LEDs and wiring from room cleaning.
Amber identification makes the protected lighting circuit visually obvious.
Dimming allows the illuminance to be matched to the sensitivity of the process.
Preocupaciones del producto del cliente
A yellow-looking lamp is not necessarily spectrally suitable; emitted blue energy and filter aging must be considered separately from appearance.
A white LED behind a yellow cover still leaks short-wavelength energy.Native amber emitters minimize blue content at the source.
Colored plastic filters fade after heat and cleaning exposure.The spectral function comes from the LED source rather than only from the cover tint.
Operators accidentally switch on ordinary white lights.Distinct amber fixtures and separately identified controls differentiate the protected circuit.
Excessive intensity can still affect a highly sensitive process.Dimming and layout selection tune illuminance as well as wavelength.
Aplicaciones típicas
Photolithography yellow roomsPhotoresist handlingLight-sensitive film processingPhotosensitive chemical preparation
Parámetros técnicos
Typical configurable construction ranges for a narrow-spectrum amber cleanroom luminaire are listed below.
| Materiales Core | Powder-coated steel or aluminum housing with native amber LED boards and sealed clear or amber polycarbonate optic |
|---|---|
| Panel de espesor | 45-120 mm luminaire body depth |
| Ancho efectivo | 100-620 mm exposed fixture width |
| Longitud máxima | Up to 1500 mm overall luminaire length |
| Acero frente a espesor | 0.8-1.2 mm formed steel housing where selected |
| Densidad Core | Approximately 1200 kg/m³ for the polycarbonate optical cover |
| Conductividad térmica | 0.20-0.22 W/(m·K) for the polycarbonate optic |
| Superficie acabada | White cleanable exterior with amber-emitting optical face and amber circuit identification |
| Tipo conjunto | Gasketed lens frame with sealed end caps or recessed ceiling flange and protected cable entry |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Nominal 570 nm or 590 nm sourceRecessed, surface or linear body0-10 V or DALI dimmingAmber-only or amber/white dual circuit
Planning a Amber Cleanroom Light specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
