Narrow-spectrum amber cleanroom luminaire illuminated in warm amber

クリーンルーム照明 · 電気機器

琥珀色クリーンルームライト

A sealed cleanroom fixture using native amber LEDs to limit short-wavelength exposure in photosensitive process areas.

Native Amber LED Source
Low Blue-Light Output
Sealed Cleanroom Housing
Distinct Yellow Visual Cue

商品紹介

This luminaire replaces a white phosphor source and colored sleeve with LEDs that emit principally in the amber region. The controlled spectrum is used where photoresists, films or light-sensitive materials must be handled under reduced blue and near-UV energy. The fixture retains the same gasketed white housing and smooth optical face used for general cleanroom lighting, while amber lenses or indicators clearly distinguish the circuit.

主要な特徴

Native amber emitters avoid relying only on a fading external filter.

The narrow spectrum reduces unwanted short-wavelength energy at the work surface.

A sealed optical chamber protects LEDs and wiring from room cleaning.

Amber identification makes the protected lighting circuit visually obvious.

Dimming allows the illuminance to be matched to the sensitivity of the process.

お客様の製品に関する懸念事項

A yellow-looking lamp is not necessarily spectrally suitable; emitted blue energy and filter aging must be considered separately from appearance.

A white LED behind a yellow cover still leaks short-wavelength energy.Native amber emitters minimize blue content at the source.

Colored plastic filters fade after heat and cleaning exposure.The spectral function comes from the LED source rather than only from the cover tint.

Operators accidentally switch on ordinary white lights.Distinct amber fixtures and separately identified controls differentiate the protected circuit.

Excessive intensity can still affect a highly sensitive process.Dimming and layout selection tune illuminance as well as wavelength.

典型的な用途

Photolithography yellow roomsPhotoresist handlingLight-sensitive film processingPhotosensitive chemical preparation

技術的なパラメータ

Typical configurable construction ranges for a narrow-spectrum amber cleanroom luminaire are listed below.

コア材料	Powder-coated steel or aluminum housing with native amber LED boards and sealed clear or amber polycarbonate optic
パネルの厚さ	45-120 mm luminaire body depth
有効幅	100-620 mm exposed fixture width
最大長さ	Up to 1500 mm overall luminaire length
鋼鉄の厚さを直面する	0.8-1.2 mm formed steel housing where selected
コア密度	Approximately 1200 kg/m³ for the polycarbonate optical cover
熱伝導率	0.20-0.22 W/(m·K) for the polycarbonate optic
表面仕上げ	White cleanable exterior with amber-emitting optical face and amber circuit identification
ジョイントタイプ	Gasketed lens frame with sealed end caps or recessed ceiling flange and protected cable entry
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Nominal 570 nm or 590 nm sourceRecessed, surface or linear body0-10 V or DALI dimmingAmber-only or amber/white dual circuit

Planning a Amber Cleanroom Light specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する