Narrow-spectrum amber cleanroom luminaire illuminated in warm amber

Reinraum Beleuchtung und elektrische Ausrüstung

Amber Cleanroom Licht

A sealed cleanroom fixture using native amber LEDs to limit short-wavelength exposure in photosensitive process areas.

Native Amber LED Source
Low Blue-Light Output
Sealed Cleanroom Housing
Distinct Yellow Visual Cue

Bitte senden Sie eine Anfrage. Browse Produkte

Produkteinführung

This luminaire replaces a white phosphor source and colored sleeve with LEDs that emit principally in the amber region. The controlled spectrum is used where photoresists, films or light-sensitive materials must be handled under reduced blue and near-UV energy. The fixture retains the same gasketed white housing and smooth optical face used for general cleanroom lighting, while amber lenses or indicators clearly distinguish the circuit.

Key Features

Native amber emitters avoid relying only on a fading external filter.

The narrow spectrum reduces unwanted short-wavelength energy at the work surface.

A sealed optical chamber protects LEDs and wiring from room cleaning.

Amber identification makes the protected lighting circuit visually obvious.

Dimming allows the illuminance to be matched to the sensitivity of the process.

Kunden Produktbedenken

A yellow-looking lamp is not necessarily spectrally suitable; emitted blue energy and filter aging must be considered separately from appearance.

A white LED behind a yellow cover still leaks short-wavelength energy.Native amber emitters minimize blue content at the source.

Colored plastic filters fade after heat and cleaning exposure.The spectral function comes from the LED source rather than only from the cover tint.

Operators accidentally switch on ordinary white lights.Distinct amber fixtures and separately identified controls differentiate the protected circuit.

Excessive intensity can still affect a highly sensitive process.Dimming and layout selection tune illuminance as well as wavelength.

Typische Anwendungen

Photolithography yellow roomsPhotoresist handlingLight-sensitive film processingPhotosensitive chemical preparation

Technische Parameter

Typical configurable construction ranges for a narrow-spectrum amber cleanroom luminaire are listed below.

Core Material	Powder-coated steel or aluminum housing with native amber LED boards and sealed clear or amber polycarbonate optic
Panel Dicke	45-120 mm luminaire body depth
Effektive Breite	100-620 mm exposed fixture width
Maximale Länge	Up to 1500 mm overall luminaire length
Stahl facing Dicke	0.8-1.2 mm formed steel housing where selected
Kerndichte	Approximately 1200 kg/m³ for the polycarbonate optical cover
Thermische Leitfähigkeit	0.20-0.22 W/(m·K) for the polycarbonate optic
Oberfläche Finish	White cleanable exterior with amber-emitting optical face and amber circuit identification
Gemeinsamer Typ	Gasketed lens frame with sealed end caps or recessed ceiling flange and protected cable entry
Customisierung	Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung.

Verfügbare Optionen

Nominal 570 nm or 590 nm sourceRecessed, surface or linear body0-10 V or DALI dimmingAmber-only or amber/white dual circuit

Planning a Amber Cleanroom Light specification?

Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.

Sprechen Sie mit unserem Team