Narrow-spectrum amber cleanroom luminaire illuminated in warm amber

Cleanroom Lighting dan Peralatan Listrik

Amber Cleanroom Lampu

A sealed cleanroom fixture using native amber LEDs to limit short-wavelength exposure in photosensitive process areas.

Native Amber LED Source
Low Blue-Light Output
Sealed Cleanroom Housing
Distinct Yellow Visual Cue

Perkenalan produk

This luminaire replaces a white phosphor source and colored sleeve with LEDs that emit principally in the amber region. The controlled spectrum is used where photoresists, films or light-sensitive materials must be handled under reduced blue and near-UV energy. The fixture retains the same gasketed white housing and smooth optical face used for general cleanroom lighting, while amber lenses or indicators clearly distinguish the circuit.

Fitur utama:

Native amber emitters avoid relying only on a fading external filter.

The narrow spectrum reduces unwanted short-wavelength energy at the work surface.

A sealed optical chamber protects LEDs and wiring from room cleaning.

Amber identification makes the protected lighting circuit visually obvious.

Dimming allows the illuminance to be matched to the sensitivity of the process.

Kekhawatiran produk pelanggan

A yellow-looking lamp is not necessarily spectrally suitable; emitted blue energy and filter aging must be considered separately from appearance.

A white LED behind a yellow cover still leaks short-wavelength energy.Native amber emitters minimize blue content at the source.

Colored plastic filters fade after heat and cleaning exposure.The spectral function comes from the LED source rather than only from the cover tint.

Operators accidentally switch on ordinary white lights.Distinct amber fixtures and separately identified controls differentiate the protected circuit.

Excessive intensity can still affect a highly sensitive process.Dimming and layout selection tune illuminance as well as wavelength.

Aplikasi yang Tipis

Photolithography yellow roomsPhotoresist handlingLight-sensitive film processingPhotosensitive chemical preparation

Parameter teknis

Typical configurable construction ranges for a narrow-spectrum amber cleanroom luminaire are listed below.

Bahan inti	Powder-coated steel or aluminum housing with native amber LED boards and sealed clear or amber polycarbonate optic
Ketebalan Panel (Panel Thickness)	45-120 mm luminaire body depth
Efektif lebar	100-620 mm exposed fixture width
Panjang maksimum	Up to 1500 mm overall luminaire length
Baja menghadap ketebalan	0.8-1.2 mm formed steel housing where selected
Kepadatan inti (core density)	Approximately 1200 kg/m³ for the polycarbonate optical cover
Konduktivitas Termal (Thermal Conductivity)	0.20-0.22 W/(m·K) for the polycarbonate optic
Permukaan selesai	White cleanable exterior with amber-emitting optical face and amber circuit identification
Jenis Bersama	Gasketed lens frame with sealed end caps or recessed ceiling flange and protected cable entry
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Nominal 570 nm or 590 nm sourceRecessed, surface or linear body0-10 V atau DALI dimmingAmber-only or amber/white dual circuit

Planning a Amber Cleanroom Light specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami