Narrow-spectrum amber cleanroom luminaire illuminated in warm amber

클린룸 조명 및 전기 장비

황색 클린룸 라이트

A sealed cleanroom fixture using native amber LEDs to limit short-wavelength exposure in photosensitive process areas.

Native Amber LED Source
Low Blue-Light Output
Sealed Cleanroom Housing
Distinct Yellow Visual Cue

견적 요청 제품 찾아보기

상품 소개

This luminaire replaces a white phosphor source and colored sleeve with LEDs that emit principally in the amber region. The controlled spectrum is used where photoresists, films or light-sensitive materials must be handled under reduced blue and near-UV energy. The fixture retains the same gasketed white housing and smooth optical face used for general cleanroom lighting, while amber lenses or indicators clearly distinguish the circuit.

주요 기능

Native amber emitters avoid relying only on a fading external filter.

The narrow spectrum reduces unwanted short-wavelength energy at the work surface.

A sealed optical chamber protects LEDs and wiring from room cleaning.

Amber identification makes the protected lighting circuit visually obvious.

Dimming allows the illuminance to be matched to the sensitivity of the process.

고객 제품 관심사

A yellow-looking lamp is not necessarily spectrally suitable; emitted blue energy and filter aging must be considered separately from appearance.

A white LED behind a yellow cover still leaks short-wavelength energy.Native amber emitters minimize blue content at the source.

Colored plastic filters fade after heat and cleaning exposure.The spectral function comes from the LED source rather than only from the cover tint.

Operators accidentally switch on ordinary white lights.Distinct amber fixtures and separately identified controls differentiate the protected circuit.

Excessive intensity can still affect a highly sensitive process.Dimming and layout selection tune illuminance as well as wavelength.

일반적인 응용 프로그램

Photolithography yellow roomsPhotoresist handlingLight-sensitive film processingPhotosensitive chemical preparation

기술 매개변수

Typical configurable construction ranges for a narrow-spectrum amber cleanroom luminaire are listed below.

핵심 재료	Powder-coated steel or aluminum housing with native amber LED boards and sealed clear or amber polycarbonate optic
패널 두께	45-120 mm luminaire body depth
유효 폭	100-620 mm exposed fixture width
최대 길이	Up to 1500 mm overall luminaire length
강철 면면 두께	0.8-1.2 mm formed steel housing where selected
코어 밀도	Approximately 1200 kg/m³ for the polycarbonate optical cover
열전도도 (Thermal Conductivity)	0.20-0.22 W/(m·K) for the polycarbonate optic
표면 마무리	White cleanable exterior with amber-emitting optical face and amber circuit identification
접합 유형	Gasketed lens frame with sealed end caps or recessed ceiling flange and protected cable entry
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Nominal 570 nm or 590 nm sourceRecessed, surface or linear body0-10 V or DALI dimmingAmber-only or amber/white dual circuit

Planning a Amber Cleanroom Light specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.