English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Персонал и оборудование для дезактивации материалов
Положительно- давление чистый переходной коробки
A filtered-supply pass box maintained above adjacent pressure to reduce inward contamination towards sensitive payloads.
- Positive Chamber Bias
- Filtered Supply Air
- Controlled Relief Path
- Timed Clean-Air Purge
Введение продукции
The positive-pressure transfer pass box supplies more filtered air than leaves through its controlled relief path, moving small leakage outwards instead of drawing room particles towards the payload. A fan, diffuser and pressure sensor maintain the selected chamber condition. Receiving-side access can be delayed until a purge and pressure recovery have completed.
Основные характеристики
A defined relief path avoids reliance on door-gap leakage.
A full-width diffuser distributes clean air across trays and containers.
Pressure indication supports operational checks before release.
A timed purge clears loading-side air before clean-side access.
Обеспокоенность клиентов продуктами
Payload protection requires outward leakage control without excessive door force or uncontrolled airflow to adjacent rooms.
Room particles enter through minor gasket imperfections.Filtered positive bias drives leakage outward from the protected payload zone.
High pressure strains latches and complicates closing.A controlled relief path limits chamber pressure rise.
A narrow jet bypasses the load and leaves corners stagnant.A broad diffuser spreads supply air over the chamber.
The receiving door opens before loading-side air is displaced.A purge timer and pressure permissive control release.
Типичные приложения
Sterile component protectionOptics and sensor transferMicroelectronics materialsMedical-device assembly
Технические параметры
Representative clean-air construction ranges for a positive-pressure transfer pass box are shown below.
| Основной материал | SUS 304 or SUS 316L chamber with variable-speed filtered supply fan, diffuser and relief path |
|---|---|
| Толщина панели | 80-150 mm supply-plenum and double-wall construction |
| эффективная ширина | 500-1200 mm clear transfer width |
| Максимальная длина | Up to 1500 mm chamber depth |
| Толщина линий стали | 1.0-1.5 mm stainless-steel facing |
| Плотность ядра | 35-40 kg/m³ polyurethane insulation around supply and relief plenums |
| Теплопроводимость | 0.022-0.028 W/(m·K) for polyurethane plenum insulation |
| Поверхностная отделка | Brushed stainless chamber with smooth diffuser and removable payload shelf |
| Объединенный тип | Sealed cabinet seams with interlocked compression doors, gasketed filter frame and relief connection |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Typical +10 to +30 Pa pressure rangeH13 or H14 supply filterConstant-pressure EC fan controlFiltered or ducted relief connection
Planning a Positive-Pressure Clean Transfer Pass Box specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
