Positive-pressure clean transfer pass box with stainless body and supply-fan module

Peralatan Dekontaminasi Kakitangan dan Bahan

Positif-Tekanan Pindahan Bersih Kotak Pas

A filtered-supply pass box maintained above adjacent pressure to reduce inward contamination towards sensitive payloads.

Positive Chamber Bias
Filtered Supply Air
Controlled Relief Path
Timed Clean-Air Purge

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The positive-pressure transfer pass box supplies more filtered air than leaves through its controlled relief path, moving small leakage outwards instead of drawing room particles towards the payload. A fan, diffuser and pressure sensor maintain the selected chamber condition. Receiving-side access can be delayed until a purge and pressure recovery have completed.

Ciri-ciri Utama

A filtered supply fan maintains a small positive pressure bias.

A defined relief path avoids reliance on door-gap leakage.

A full-width diffuser distributes clean air across trays and containers.

Pressure indication supports operational checks before release.

A timed purge clears loading-side air before clean-side access.

Kebimbangan Produk Pelanggan

Payload protection requires outward leakage control without excessive door force or uncontrolled airflow to adjacent rooms.

Room particles enter through minor gasket imperfections.Filtered positive bias drives leakage outward from the protected payload zone.

High pressure strains latches and complicates closing.A controlled relief path limits chamber pressure rise.

A narrow jet bypasses the load and leaves corners stagnant.A broad diffuser spreads supply air over the chamber.

The receiving door opens before loading-side air is displaced.A purge timer and pressure permissive control release.

Permohonan yang biasa

Sterile component protectionOptics and sensor transferMicroelectronics materialsMedical-device assembly

Parameter teknikal

Representative clean-air construction ranges for a positive-pressure transfer pass box are shown below.

Bahan Teras	SUS 304 or SUS 316L chamber with variable-speed filtered supply fan, diffuser and relief path
Ketebalan Panel	80-150 mm supply-plenum and double-wall construction
Lebar berkesan	500-1200 mm clear transfer width
Panjang maksimum	Sehingga kedalaman bilik 1500 mm
Keluli Menghadapi Ketebalan	1.0-1.5 mm menghadap keluli tahan karat
Ketumpatan teras	35-40 kg/m³ polyurethane insulation around supply and relief plenums
Kekonduksian Terma	0.022-0.028 W / (m · K) untuk penebat pleno poliuretan
Kemasan permukaan	Brushed stainless chamber with smooth diffuser and removable payload shelf
Jenis Bersatu	Sealed cabinet seams with interlocked compression doors, gasketed filter frame and relief connection
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Typical +10 to +30 Pa pressure rangeH13 or H14 supply filterConstant-pressure EC fan controlFiltered or ducted relief connection

Planning a Positive-Pressure Clean Transfer Pass Box specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami