English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
ОВК и оборудование для обработки воздуха в чистых помещениях
Промышленный охлаждающий дегумификатор
A self-contained condensation dehumidifier that cools process air below its dew point, drains the collected water and reheats the dry air through the condenser.
- Refrigeration Moisture Removal
- Automatic Hot-Gas Defrost
- Continuous Condensate Pumping
- Digital Humidity Control
Введение продукции
The industrial refrigerant dehumidifier combines a washable inlet filter, direct-expansion evaporator, compressor, condenser and centrifugal fan in one wheeled cabinet. Moist air condenses on the cold evaporator, then passes over the condenser so the discharged air is dry and slightly warmer. A built-in controller, hot-gas defrost and pumped drain support unattended humidity control in clean production and support spaces operating above typical refrigeration frost limits.
Основные характеристики
Hot-gas defrost clears evaporator ice during low-temperature operation without relying on a long passive thaw cycle.
A condensate pump lifts collected water to a remote drain where gravity fall is unavailable.
Two-stage fan control and an external humidistat input allow the unit to match changing room moisture loads.
Обеспокоенность клиентов продуктами
Moderately humid rooms need dependable water removal without the regeneration heat and dual air streams required by a desiccant system.
Seasonal humidity repeatedly rises above the acceptable range during production hours.A dedicated refrigeration circuit removes latent load independently of the room cooling thermostat.
The evaporator can ice when inlet air temperature falls during overnight operation.Automatic hot-gas defrost redirects refrigerant heat to the coil and restores airflow quickly.
A full condensate tank stops portable dehumidifiers when no operator is present.A float-controlled pump sends condensate through a hose to the building drain for continuous operation.
Dust accumulation on the cold coil reduces moisture removal and raises energy use.A front-access washable prefilter protects the evaporator and can be removed without opening the refrigeration compartment.
Типичные приложения
Cleanroom support corridors and gowning areasMedical-device packaging roomsPharmaceutical raw-material storesElectronics assembly rooms with moderate dew-point targetsControlled warehouses and archives
Технические параметры
Representative construction dimensions for a compact industrial condensation dehumidifier are listed below.
| Основной материал | Copper-tube aluminum-fin evaporator and condenser with hermetic compressor in a galvanized steel cabinet |
|---|---|
| Толщина панели | 1.0-1.5 mm removable powder-coated cabinet panels |
| эффективная ширина | 500-900 mm nominal cabinet width |
| Максимальная длина | 326-547 mm cabinet depth across referenced fixed and portable configurations |
| Толщина линий стали | 1.0-1.5 mm galvanized steel exterior sheet |
| Плотность ядра | Approximately 7800-7900 kg/m³ for galvanized carbon-steel cabinet material |
| Теплопроводимость | Approximately 45-55 W/(m·K) for galvanized carbon-steel cabinet material |
| Поверхностная отделка | White polyester powder coating with a corrosion-resistant blue service panel |
| Объединенный тип | Bolted service cabinet with brazed copper refrigerant joints and hose-connected condensate outlet |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Gravity drain or integrated condensate lifting pumpRemote humidistat and dry-contact alarm connectionDuct collars for closed-loop room recirculationAlternative low-global-warming-potential refrigerant circuit
Planning a Industrial Refrigerant Dehumidifier specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
