Industrial refrigerant dehumidifier with top discharge fan and wheeled cabinet

클린룸 HVAC 및 공기 처리 장비

산업용 냉각제 탈습기

A self-contained condensation dehumidifier that cools process air below its dew point, drains the collected water and reheats the dry air through the condenser.

Refrigeration Moisture Removal
Automatic Hot-Gas Defrost
Continuous Condensate Pumping
Digital Humidity Control

견적 요청 제품 찾아보기

상품 소개

The industrial refrigerant dehumidifier combines a washable inlet filter, direct-expansion evaporator, compressor, condenser and centrifugal fan in one wheeled cabinet. Moist air condenses on the cold evaporator, then passes over the condenser so the discharged air is dry and slightly warmer. A built-in controller, hot-gas defrost and pumped drain support unattended humidity control in clean production and support spaces operating above typical refrigeration frost limits.

주요 기능

A copper-tube evaporator with closely spaced aluminum fins provides a large cold surface for water-vapor condensation.

Hot-gas defrost clears evaporator ice during low-temperature operation without relying on a long passive thaw cycle.

A condensate pump lifts collected water to a remote drain where gravity fall is unavailable.

Two-stage fan control and an external humidistat input allow the unit to match changing room moisture loads.

고객 제품 관심사

Moderately humid rooms need dependable water removal without the regeneration heat and dual air streams required by a desiccant system.

Seasonal humidity repeatedly rises above the acceptable range during production hours.A dedicated refrigeration circuit removes latent load independently of the room cooling thermostat.

The evaporator can ice when inlet air temperature falls during overnight operation.Automatic hot-gas defrost redirects refrigerant heat to the coil and restores airflow quickly.

A full condensate tank stops portable dehumidifiers when no operator is present.A float-controlled pump sends condensate through a hose to the building drain for continuous operation.

Dust accumulation on the cold coil reduces moisture removal and raises energy use.A front-access washable prefilter protects the evaporator and can be removed without opening the refrigeration compartment.

일반적인 응용 프로그램

Cleanroom support corridors and gowning areasMedical-device packaging roomsPharmaceutical raw-material storesElectronics assembly rooms with moderate dew-point targetsControlled warehouses and archives

기술 매개변수

Representative construction dimensions for a compact industrial condensation dehumidifier are listed below.

핵심 재료	Copper-tube aluminum-fin evaporator and condenser with hermetic compressor in a galvanized steel cabinet
패널 두께	1.0-1.5 mm removable powder-coated cabinet panels
유효 폭	500-900 mm nominal cabinet width
최대 길이	326-547 mm cabinet depth across referenced fixed and portable configurations
강철 면면 두께	1.0-1.5 mm galvanized steel exterior sheet
코어 밀도	Approximately 7800-7900 kg/m³ for galvanized carbon-steel cabinet material
열전도도 (Thermal Conductivity)	Approximately 45-55 W/(m·K) for galvanized carbon-steel cabinet material
표면 마무리	White polyester powder coating with a corrosion-resistant blue service panel
접합 유형	Bolted service cabinet with brazed copper refrigerant joints and hose-connected condensate outlet
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Gravity drain or integrated condensate lifting pumpRemote humidistat and dry-contact alarm connectionDuct collars for closed-loop room recirculationAlternative low-global-warming-potential refrigerant circuit

Planning a Industrial Refrigerant Dehumidifier specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.