Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Cleanroom HVAC dan Peralatan Penanganan Udara
Industri Refrigerant Dehumidifier
A self-contained condensation dehumidifier that cools process air below its dew point, drains the collected water and reheats the dry air through the condenser.
- Refrigeration Moisture Removal
- Automatic Hot-Gas Defrost
- Continuous Condensate Pumping
- Digital Humidity Control
Perkenalan produk
The industrial refrigerant dehumidifier combines a washable inlet filter, direct-expansion evaporator, compressor, condenser and centrifugal fan in one wheeled cabinet. Moist air condenses on the cold evaporator, then passes over the condenser so the discharged air is dry and slightly warmer. A built-in controller, hot-gas defrost and pumped drain support unattended humidity control in clean production and support spaces operating above typical refrigeration frost limits.
Fitur utama:
Hot-gas defrost clears evaporator ice during low-temperature operation without relying on a long passive thaw cycle.
A condensate pump lifts collected water to a remote drain where gravity fall is unavailable.
Two-stage fan control and an external humidistat input allow the unit to match changing room moisture loads.
Kekhawatiran produk pelanggan
Moderately humid rooms need dependable water removal without the regeneration heat and dual air streams required by a desiccant system.
Seasonal humidity repeatedly rises above the acceptable range during production hours.A dedicated refrigeration circuit removes latent load independently of the room cooling thermostat.
The evaporator can ice when inlet air temperature falls during overnight operation.Automatic hot-gas defrost redirects refrigerant heat to the coil and restores airflow quickly.
A full condensate tank stops portable dehumidifiers when no operator is present.A float-controlled pump sends condensate through a hose to the building drain for continuous operation.
Dust accumulation on the cold coil reduces moisture removal and raises energy use.A front-access washable prefilter protects the evaporator and can be removed without opening the refrigeration compartment.
Aplikasi yang Tipis
Cleanroom support corridors and gowning areasMedical-device packaging roomsPharmaceutical raw-material storesElectronics assembly rooms with moderate dew-point targetsControlled warehouses and archives
Parameter teknis
Representative construction dimensions for a compact industrial condensation dehumidifier are listed below.
| Bahan inti | Copper-tube aluminum-fin evaporator and condenser with hermetic compressor in a galvanized steel cabinet |
|---|---|
| Ketebalan Panel (Panel Thickness) | 1.0-1.5 mm removable powder-coated cabinet panels |
| Efektif lebar | 500-900 mm nominal cabinet width |
| Panjang maksimum | 326-547 mm cabinet depth across referenced fixed and portable configurations |
| Baja menghadap ketebalan | 1.0-1.5 mm galvanized steel exterior sheet |
| Kepadatan inti (core density) | Approximately 7800-7900 kg/m³ for galvanized carbon-steel cabinet material |
| Konduktivitas Termal (Thermal Conductivity) | Approximately 45-55 W/(m·K) for galvanized carbon-steel cabinet material |
| Permukaan selesai | White polyester powder coating with a corrosion-resistant blue service panel |
| Jenis Bersama | Bolted service cabinet with brazed copper refrigerant joints and hose-connected condensate outlet |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Gravity drain or integrated condensate lifting pumpRemote humidistat and dry-contact alarm connectionDuct collars for closed-loop room recirculationAlternative low-global-warming-potential refrigerant circuit
Planning a Industrial Refrigerant Dehumidifier specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
