Ultrafiltration system complete vertical membrane rack three-quarter view

Sistemas de Utilidade de Cleanroom

Z Sistema de ultrafiltração

An automated hollow-fiber ultrafiltration rack for process-water clarification, RO pretreatment and clean utility support.

Vertical hollow-fiber modules
Automated backwash sequences
Balanced feed and filtrate headers

Solicite um orçamento. Browse produtos

Introdução do produto

The packaged UF rack combines vertical membrane modules, process headers, automated valves and pressure/flow monitoring for repeatable filtration and cleaning.

Características-chave

Accessible vertical modules

Automated filtration and backwash

Optional air scour

Transmembrane-pressure monitoring

CIP connections

Modular expansion

Preocupações do produto do cliente

Flux, cleaning and manifold design are selected around solids loading and the required downstream barrier performance.

Rapid membrane foulingSet flux, backwash interval, air scour and chemical cleaning from feed-water characterization.

Uneven rack loadingUse symmetrical headers and measured module-bank pressure drop.

Incomplete backwashSequence reverse flow, drain-down and optional air scour before returning to filtration.

Difficult integrity assessmentProvide isolatable module groups and instrument connections for the selected integrity test.

Aplicações típicas

RO pretreatmentClean utility clarificationSurface and groundwater polishingFood and cosmetic process waterIndustrial water reuse

Parâmetros técnicos

Module count, flux, recovery and cleaning sequence remain configurable to feed water and operating duty.

Material principal	Hydrophilic PVDF or PES hollow-fiber ultrafiltration membrane modules
Painel de espessura	Membrane fiber and module wall dimensions specified in mm by selected design
Largura efetiva	Rack width typically 900–2600 mm, module count dependent
Comprimento máximo	Rack length typically up to 8000 mm, bank configuration dependent
Aço enfrentando espessura	Stainless-steel frame and enclosure sheet typically 1.5–3.0 mm
Densidade Core	Structural material density approximately 7930 kg/m³ for 304 stainless steel
Condutividade térmica	Stainless-steel structural components approximately 16.2 W/(m·K) at ambient temperature
Superfície acabado	Brushed or bead-blasted stainless frame with smooth process manifolds
Tipo conjunto	Flanged or grooved headers with sanitary clamp or union module branches
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

PVDF or PES modulesStainless or engineered-polymer headersBackwash pumpAir-scour interfaceEnhanced backwash skidTurbidity and SDI instrumentsDuty/standby racks

Planning a Ultrafiltration System specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe