Ultrafiltration system complete vertical membrane rack three-quarter view

Temiz Oda Hizmet Sistemi

Ultrafiltrasyon Sistemi

An automated hollow-fiber ultrafiltration rack for process-water clarification, RO pretreatment and clean utility support.

Vertical hollow-fiber modules
Automated backwash sequences
Balanced feed and filtrate headers

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The packaged UF rack combines vertical membrane modules, process headers, automated valves and pressure/flow monitoring for repeatable filtration and cleaning.

Ana Özellikler

Accessible vertical modules

Automated filtration and backwash

Optional air scour

Transmembrane-pressure monitoring

CIP connections

Modular expansion

Müşteri Ürün Sorunları

Flux, cleaning and manifold design are selected around solids loading and the required downstream barrier performance.

Rapid membrane foulingSet flux, backwash interval, air scour and chemical cleaning from feed-water characterization.

Uneven rack loadingUse symmetrical headers and measured module-bank pressure drop.

Incomplete backwashSequence reverse flow, drain-down and optional air scour before returning to filtration.

Difficult integrity assessmentProvide isolatable module groups and instrument connections for the selected integrity test.

Tipik uygulamalar

RO pretreatmentClean utility clarificationSurface and groundwater polishingFood and cosmetic process waterIndustrial water reuse

Teknik parametreler

Module count, flux, recovery and cleaning sequence remain configurable to feed water and operating duty.

Temel malzemeler	Hydrophilic PVDF or PES hollow-fiber ultrafiltration membrane modules
Panel kalınlığı	Membrane fiber and module wall dimensions specified in mm by selected design
Effective Width (Etkili Genişlik)	Rack width typically 900–2600 mm, module count dependent
Maksimum uzunluk	Rack length typically up to 8000 mm, bank configuration dependent
Çelik yüz yüze kalınlığı	Stainless-steel frame and enclosure sheet typically 1.5–3.0 mm
Core Density (Çekirdek Yoğunluğu)	Structural material density approximately 7930 kg/m³ for 304 stainless steel
Termal İletkenlik	Stainless-steel structural components approximately 16.2 W/(m·K) at ambient temperature
Yüzey bitirme	Brushed or bead-blasted stainless frame with smooth process manifolds
Ortak tip	Flanged or grooved headers with sanitary clamp or union module branches
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

PVDF or PES modulesStainless or engineered-polymer headersBackwash pumpAir-scour interfaceEnhanced backwash skidTurbidity and SDI instrumentsDuty/standby racks

Planning a Ultrafiltration System specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun