Ultrafiltration system complete vertical membrane rack three-quarter view

Утилитарные системы для чистых помещений

Система ультрафильтрации

An automated hollow-fiber ultrafiltration rack for process-water clarification, RO pretreatment and clean utility support.

Vertical hollow-fiber modules
Automated backwash sequences
Balanced feed and filtrate headers

Запрос котировки Просмотреть продукты

Введение продукции

The packaged UF rack combines vertical membrane modules, process headers, automated valves and pressure/flow monitoring for repeatable filtration and cleaning.

Основные характеристики

Accessible vertical modules

Automated filtration and backwash

Optional air scour

Transmembrane-pressure monitoring

CIP connections

Modular expansion

Обеспокоенность клиентов продуктами

Flux, cleaning and manifold design are selected around solids loading and the required downstream barrier performance.

Rapid membrane foulingSet flux, backwash interval, air scour and chemical cleaning from feed-water characterization.

Uneven rack loadingUse symmetrical headers and measured module-bank pressure drop.

Incomplete backwashSequence reverse flow, drain-down and optional air scour before returning to filtration.

Difficult integrity assessmentProvide isolatable module groups and instrument connections for the selected integrity test.

Типичные приложения

RO pretreatmentClean utility clarificationSurface and groundwater polishingFood and cosmetic process waterIndustrial water reuse

Технические параметры

Module count, flux, recovery and cleaning sequence remain configurable to feed water and operating duty.

Основной материал	Hydrophilic PVDF or PES hollow-fiber ultrafiltration membrane modules
Толщина панели	Membrane fiber and module wall dimensions specified in mm by selected design
эффективная ширина	Rack width typically 900–2600 mm, module count dependent
Максимальная длина	Rack length typically up to 8000 mm, bank configuration dependent
Толщина линий стали	Stainless-steel frame and enclosure sheet typically 1.5–3.0 mm
Плотность ядра	Structural material density approximately 7930 kg/m³ for 304 stainless steel
Теплопроводимость	Stainless-steel structural components approximately 16.2 W/(m·K) at ambient temperature
Поверхностная отделка	Brushed or bead-blasted stainless frame with smooth process manifolds
Объединенный тип	Flanged or grooved headers with sanitary clamp or union module branches
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

PVDF or PES modulesStainless or engineered-polymer headersBackwash pumpAir-scour interfaceEnhanced backwash skidTurbidity and SDI instrumentsDuty/standby racks

Planning a Ultrafiltration System specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой