Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamentos de drenagem, higiene e segurança da sala limpa
Drenagem de piso de sala limpa presa
Compact cleanroom drain with a removable water-seal trap to control sewer gases while retaining service access.
- Removable Water-Seal Trap
- Cleanable Stainless Seal Cup
- Above-Floor Service Access
- Vertical or Side Outlet
Introdução do produto
The trapped cleanroom floor drain integrates an accessible water-seal cup below a flush stainless top. Its welded body and removable internals allow the trap, basket and sump to be inspected from above without opening the connected drain line. Vertical and side-outlet versions suit different slab depths, while the floor flange can be configured for resin, vinyl or tiled finishes.
Características-chave
The smooth stainless sump and seal components can be lifted out for cleaning.
An optional sediment basket protects the trap and downstream pipe from larger debris.
Vertical or horizontal discharge arrangements accommodate different floor constructions.
Preocupações do produto do cliente
Intermittently wet controlled rooms need odor isolation without creating a concealed trap that is difficult to inspect, prime or clear.
An untrapped floor opening can allow drainage odors to enter a controlled room.A removable water-seal cup creates a physical barrier between the room and waste pipe.
Long idle periods can allow the water seal to evaporate.An optional trap-primer connection can replenish the seal where the maintenance plan requires it.
A blockage below a fixed grate may require disruptive pipe access.The grate, basket and trap cup remove from above so the outlet can be cleared directly.
Deep traps may conflict with shallow slabs or congested services.Selectable trap depth and vertical or side outlet layouts adapt the body to available floor depth.
Aplicações típicas
Cleanroom gowning areasControlled laboratoriesSanitary roomsIntermittent-wash support spaces
Parâmetros técnicos
Typical ranges for a compact stainless trapped floor drain are shown below; final water-seal depth, top and outlet depend on room use and floor construction.
| Material principal | AISI 304 or 316L stainless steel body with EPDM seal |
|---|---|
| Painel de espessura | 1,2 - 2,0 mm parede do corpo formado |
| Largura efetiva | 150-250 mm top width |
| Comprimento máximo | Up to 500 mm overall trapped body length |
| Aço enfrentando espessura | 1.5-2.5 mm exposed stainless top and flange |
| Densidade Core | 7900 - 8000 kg / m3 para aço inoxidável |
| Condutividade térmica | 14 - 16 W / (m · K) para aço inoxidável |
| Superfície acabado | Pickled and passivated or satin-finished stainless steel |
| Tipo conjunto | Removable water-seal trap seated in a continuously welded drain body |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
25-50 mm water sealGrau 304 ou 316LOutlet DN50 - DN110Basket and trap-primer connection
Planning a Trapped Cleanroom Floor Drain specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
