İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Drenajı, Hijyen ve Güvenlik Ekipmanları
Tutsak Temizlik Odası Zemin Drenajı
Compact cleanroom drain with a removable water-seal trap to control sewer gases while retaining service access.
- Removable Water-Seal Trap
- Cleanable Stainless Seal Cup
- Above-Floor Service Access
- Vertical or Side Outlet
Ürün tanıtımı
The trapped cleanroom floor drain integrates an accessible water-seal cup below a flush stainless top. Its welded body and removable internals allow the trap, basket and sump to be inspected from above without opening the connected drain line. Vertical and side-outlet versions suit different slab depths, while the floor flange can be configured for resin, vinyl or tiled finishes.
Ana Özellikler
The smooth stainless sump and seal components can be lifted out for cleaning.
An optional sediment basket protects the trap and downstream pipe from larger debris.
Vertical or horizontal discharge arrangements accommodate different floor constructions.
Müşteri Ürün Sorunları
Intermittently wet controlled rooms need odor isolation without creating a concealed trap that is difficult to inspect, prime or clear.
An untrapped floor opening can allow drainage odors to enter a controlled room.A removable water-seal cup creates a physical barrier between the room and waste pipe.
Long idle periods can allow the water seal to evaporate.An optional trap-primer connection can replenish the seal where the maintenance plan requires it.
A blockage below a fixed grate may require disruptive pipe access.The grate, basket and trap cup remove from above so the outlet can be cleared directly.
Deep traps may conflict with shallow slabs or congested services.Selectable trap depth and vertical or side outlet layouts adapt the body to available floor depth.
Tipik uygulamalar
Cleanroom gowning areasControlled laboratoriesSanitary roomsIntermittent-wash support spaces
Teknik parametreler
Typical ranges for a compact stainless trapped floor drain are shown below; final water-seal depth, top and outlet depend on room use and floor construction.
| Temel malzemeler | AISI 304 or 316L stainless steel body with EPDM seal |
|---|---|
| Panel kalınlığı | 1.2-2.0 mm formed body wall |
| Effective Width (Etkili Genişlik) | 150-250 mm top width |
| Maksimum uzunluk | Up to 500 mm overall trapped body length |
| Çelik yüz yüze kalınlığı | 1.5-2.5 mm exposed stainless top and flange |
| Core Density (Çekirdek Yoğunluğu) | 7900-8000 kg/m³ for stainless steel |
| Termal İletkenlik | 14-16 W/(m·K) for stainless steel |
| Yüzey bitirme | Pickled and passivated or satin-finished stainless steel |
| Ortak tip | Removable water-seal trap seated in a continuously welded drain body |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
25-50 mm water seal304 or 316L gradeDN50-DN110 outletBasket and trap-primer connection
Planning a Trapped Cleanroom Floor Drain specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
