Дренажное оборудование, оборудование для гигиены и безопасности в чистых помещениях

Trapped Cleanroom Floor Drain

Compact cleanroom drain with a removable water-seal trap to control sewer gases while retaining service access.

Removable Water-Seal Trap
Cleanable Stainless Seal Cup
Above-Floor Service Access
Vertical or Side Outlet

Введение продукции

The trapped cleanroom floor drain integrates an accessible water-seal cup below a flush stainless top. Its welded body and removable internals allow the trap, basket and sump to be inspected from above without opening the connected drain line. Vertical and side-outlet versions suit different slab depths, while the floor flange can be configured for resin, vinyl or tiled finishes.

Основные характеристики

A removable trap cup maintains an odor barrier while remaining accessible from floor level.

The smooth stainless sump and seal components can be lifted out for cleaning.

An optional sediment basket protects the trap and downstream pipe from larger debris.

Vertical or horizontal discharge arrangements accommodate different floor constructions.

Обеспокоенность клиентов продуктами

Intermittently wet controlled rooms need odor isolation without creating a concealed trap that is difficult to inspect, prime or clear.

An untrapped floor opening can allow drainage odors to enter a controlled room.A removable water-seal cup creates a physical barrier between the room and waste pipe.

Long idle periods can allow the water seal to evaporate.An optional trap-primer connection can replenish the seal where the maintenance plan requires it.

A blockage below a fixed grate may require disruptive pipe access.The grate, basket and trap cup remove from above so the outlet can be cleared directly.

Deep traps may conflict with shallow slabs or congested services.Selectable trap depth and vertical or side outlet layouts adapt the body to available floor depth.

Типичные приложения

Cleanroom gowning areasControlled laboratoriesSanitary roomsIntermittent-wash support spaces

Технические параметры

Typical ranges for a compact stainless trapped floor drain are shown below; final water-seal depth, top and outlet depend on room use and floor construction.

Основной материал	AISI 304 or 316L stainless steel body with EPDM seal
Толщина панели	1.2-2.0 mm formed body wall
эффективная ширина	150-250 mm top width
Максимальная длина	Up to 500 mm overall trapped body length
Толщина линий стали	1.5-2.5 mm exposed stainless top and flange
Плотность ядра	7900 - 8000 кг / м3 для нержавеющей стали
Теплопроводимость	14 - 16 Вт / (м · К) для нержавеющей стали
Поверхностная отделка	Макарированная и пассивированная нержавеющая сталь или сатинная отделка
Объединенный тип	Removable water-seal trap seated in a continuously welded drain body
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

25-50 mm water seal304 or 316L gradeВыпуск DN50-DN110Basket and trap-primer connection

Planning a Trapped Cleanroom Floor Drain specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой