Complete remote viable air sampler with external controller, silicone hose and vertical stainless sampling head

Produtos de Monitoramento Ambiental Microbiológico

Amostrador de ar viável remoto

A fixed remote impaction system that keeps its blower and electronics outside containment while sampling viable organisms at one critical internal point.

Remote Containment Sampling
External Blower and Electronics
VHP-Compatible Air Path
Regulated 100 L/min Flow

Solicite um orçamento. Browse produtos

Introdução do produto

The Remote Viable Air Sampler separates the electropolished stainless sampling head from the control and blower enclosure. Only the cleanable head and process tubing enter the isolator or RABS, while moving parts and interfaces remain accessible outside the critical zone. Air drawn through the perforated lid impacts microorganisms onto a culture plate, then passes through a sealed hose and controlled valve path. Flow regulation, pressure checks and optional decontamination circulation support repeatable fixed-point monitoring without placing serviceable electronics inside containment.

Características-chave

A remote stainless sampling head minimizes equipment mass and heat inside the critical zone.

Closed-loop mass-flow regulation controls sample volume through the installed tubing path.

Tri-clamp joints and a double-valve arrangement support leak testing, cleaning and VHP-cycle integration.

Digital and industrial communication options allow operation from the isolator HMI or monitoring system.

Preocupações do produto do cliente

Remote sampling must preserve microbial recovery through tubing while preventing leakage, backflow and inaccessible contamination traps.

Electronics placed inside an isolator complicate cleaning and qualification.The blower, display and communication hardware remain outside while only a smooth stainless head enters containment.

Long tubing can alter the regulated flow and sampling efficiency.A mass-flow loop compensates for installed resistance within the validated tubing configuration.

The sample path may be excluded from routine VHP decontamination.Dedicated valves and a sterilization circulation path expose the head and tubing to the configured cycle.

A loose tri-clamp or hose leak causes an unrepresentative sample.Sealed sanitary joints and a pressure-test provision verify air-path integrity before monitoring.

Aplicações típicas

Sterile filling isolatorsRestricted access barrier systemsGlovebox aseptic processesFixed critical-point viable monitoring

Parâmetros técnicos

Typical construction values for a single-point remote viable air sampling system are listed below.

Material principal	316L electropolished stainless sampling head with anodized aluminum and stainless external controller
Painel de espessura	160-230 mm controller depth
Largura efetiva	160-300 mm controller width
Comprimento máximo	Up to 10000 mm validated sampling tube length for VHP-compatible installations
Aço enfrentando espessura	1.0-2.0 mm stainless controller and sampling-head wall
Densidade Core	2650-8000 kg/m³ across aluminum and stainless structural components
Condutividade térmica	14-220 W/(m·K) across stainless steel and aluminum components
Superfície acabado	Electropolished pharmaceutical-grade stainless head with smooth white and natural-metal controller surfaces
Tipo conjunto	Sanitary tri-clamp sample head, sealed silicone tubing and double-valve air-decontamination manifold
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Single or multi-head control unit90 mm or alternative culture-plate baseEthernet, Profinet, Profibus or digital I/OIn-line and exhaust filtration

Planning a Remote Viable Air Sampler specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe