Complete remote viable air sampler with external controller, silicone hose and vertical stainless sampling head

미생물 환경 모니터링 제품

원격 실행 가능한 공기 샘플러

A fixed remote impaction system that keeps its blower and electronics outside containment while sampling viable organisms at one critical internal point.

Remote Containment Sampling
External Blower and Electronics
VHP-Compatible Air Path
Regulated 100 L/min Flow

견적 요청 제품 찾아보기

상품 소개

The Remote Viable Air Sampler separates the electropolished stainless sampling head from the control and blower enclosure. Only the cleanable head and process tubing enter the isolator or RABS, while moving parts and interfaces remain accessible outside the critical zone. Air drawn through the perforated lid impacts microorganisms onto a culture plate, then passes through a sealed hose and controlled valve path. Flow regulation, pressure checks and optional decontamination circulation support repeatable fixed-point monitoring without placing serviceable electronics inside containment.

주요 기능

A remote stainless sampling head minimizes equipment mass and heat inside the critical zone.

Closed-loop mass-flow regulation controls sample volume through the installed tubing path.

Tri-clamp joints and a double-valve arrangement support leak testing, cleaning and VHP-cycle integration.

Digital and industrial communication options allow operation from the isolator HMI or monitoring system.

고객 제품 관심사

Remote sampling must preserve microbial recovery through tubing while preventing leakage, backflow and inaccessible contamination traps.

Electronics placed inside an isolator complicate cleaning and qualification.The blower, display and communication hardware remain outside while only a smooth stainless head enters containment.

Long tubing can alter the regulated flow and sampling efficiency.A mass-flow loop compensates for installed resistance within the validated tubing configuration.

The sample path may be excluded from routine VHP decontamination.Dedicated valves and a sterilization circulation path expose the head and tubing to the configured cycle.

A loose tri-clamp or hose leak causes an unrepresentative sample.Sealed sanitary joints and a pressure-test provision verify air-path integrity before monitoring.

일반적인 응용 프로그램

Sterile filling isolatorsRestricted access barrier systemsGlovebox aseptic processesFixed critical-point viable monitoring

기술 매개변수

Typical construction values for a single-point remote viable air sampling system are listed below.

핵심 재료	316L electropolished stainless sampling head with anodized aluminum and stainless external controller
패널 두께	160-230 mm controller depth
유효 폭	160-300 mm controller width
최대 길이	Up to 10000 mm validated sampling tube length for VHP-compatible installations
강철 면면 두께	1.0-2.0 mm stainless controller and sampling-head wall
코어 밀도	2650 - 8000 kg / m 3 알루미늄 및 스테인레스 구조 구성 요소
열전도도 (Thermal Conductivity)	스테인레스 스틸 및 알루미늄 구성 요소에 걸쳐 14 - 220 W / (m · K)
표면 마무리	Electropolished pharmaceutical-grade stainless head with smooth white and natural-metal controller surfaces
접합 유형	Sanitary tri-clamp sample head, sealed silicone tubing and double-valve air-decontamination manifold
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single or multi-head control unit90 mm or alternative culture-plate baseEthernet, Profinet, Profibus or digital I/OIn-line and exhaust filtration

Planning a Remote Viable Air Sampler specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.