Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Fluxo laminar e equipamentos de contenção
Porto de transferência rápida
A fixed circular barrier port that docks with a compatible container or bag interface so both doors can open together without exposing their contaminated outer faces.
- Double-Door Transfer Principle
- Interlocked Circular Docking
- Fixed Barrier Alpha Port
- Multiple Useful Diameters
Introdução do produto
The rapid transfer port mounts to an isolator, RABS or cleanroom wall and forms the fixed half of a double-door transfer system. A compatible removable container or bag port docks by guided rotation or another secure lock. The two doors couple so their exposed faces remain closed together while the combined opening provides access through the barrier. Mechanical interlocks prevent the fixed door from opening without a correctly connected counterpart and prevent undocking while the doors are open.
Características-chave
Mechanical interlocks enforce the correct dock-open-close-undock sequence.
Coupled doors isolate their previously exposed surfaces during transfer.
Replaceable lip seals maintain the connection around the selected port size.
Multiple diameters accommodate small components, tools, bags or containers.
Preocupações do produto do cliente
A barrier port must prevent incorrect opening and keep the two exposed door faces isolated throughout connection and disconnection.
The barrier door can open without a transfer container.A mechanical interlock blocks the fixed door until the compatible port is fully docked.
The container is removed while the door remains open.The locking sequence prevents undocking until both door halves are closed.
Misalignment damages the seal during connection.Guide features and a defined rotational lock center the two circular interfaces.
One port size is unsuitable for both tools and bulk components.A family of useful diameters supports different transfer loads.
Aplicações típicas
Isolator material transferRABS component loadingSterile tool transferContained waste removal
Parâmetros técnicos
Typical configurable construction ranges for a rapid transfer port are listed below.
| Material principal | SUS316L fixed frame and door with engineering-polymer lock components and FDA-compatible silicone lip seals |
|---|---|
| Painel de espessura | 30-80 mm compatible barrier-wall thickness |
| Largura efetiva | 95-440 mm useful transfer diameter |
| Comprimento máximo | Up to 460 mm nominal outer port diameter |
| Aço enfrentando espessura | 2.0-4.0 mm SUS316L frame and door components |
| Densidade Core | Approximately 8000 kg/m³ for SUS316L structural parts |
| Condutividade térmica | 14-16 W/(m·K) for austenitic stainless steel |
| Superfície acabado | Electropolished or fine-brushed SUS316L with smooth cleanable polymer lock surfaces |
| Tipo conjunto | Flanged fixed port with double-door mechanical interlock and replaceable circumferential lip seals |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
105-460 mm nominal sizesManual or externally actuated openingStainless container or single-use bag interfaceBarrier-wall adapter flange
Planning a Rapid Transfer Port specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
