Circular rapid transfer port with fixed stainless barrier door

Aliran Laminar dan Peralatan Pengekangan

Pelabuhan Pemindahan Cepat

A fixed circular barrier port that docks with a compatible container or bag interface so both doors can open together without exposing their contaminated outer faces.

Double-Door Transfer Principle
Interlocked Circular Docking
Fixed Barrier Alpha Port
Multiple Useful Diameters

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The rapid transfer port mounts to an isolator, RABS or cleanroom wall and forms the fixed half of a double-door transfer system. A compatible removable container or bag port docks by guided rotation or another secure lock. The two doors couple so their exposed faces remain closed together while the combined opening provides access through the barrier. Mechanical interlocks prevent the fixed door from opening without a correctly connected counterpart and prevent undocking while the doors are open.

Ciri-ciri Utama

A fixed circular frame integrates directly into the barrier wall.

Mechanical interlocks enforce the correct dock-open-close-undock sequence.

Coupled doors isolate their previously exposed surfaces during transfer.

Replaceable lip seals maintain the connection around the selected port size.

Multiple diameters accommodate small components, tools, bags or containers.

Kebimbangan Produk Pelanggan

A barrier port must prevent incorrect opening and keep the two exposed door faces isolated throughout connection and disconnection.

The barrier door can open without a transfer container.A mechanical interlock blocks the fixed door until the compatible port is fully docked.

The container is removed while the door remains open.The locking sequence prevents undocking until both door halves are closed.

Misalignment damages the seal during connection.Guide features and a defined rotational lock center the two circular interfaces.

One port size is unsuitable for both tools and bulk components.A family of useful diameters supports different transfer loads.

Permohonan yang biasa

Isolator material transferRABS component loadingSterile tool transferContained waste removal

Parameter teknikal

Typical configurable construction ranges for a rapid transfer port are listed below.

Bahan Teras	SUS316L fixed frame and door with engineering-polymer lock components and FDA-compatible silicone lip seals
Ketebalan Panel	30-80 mm compatible barrier-wall thickness
Lebar berkesan	95-440 mm useful transfer diameter
Panjang maksimum	Up to 460 mm nominal outer port diameter
Keluli Menghadapi Ketebalan	2.0-4.0 mm SUS316L frame and door components
Ketumpatan teras	Approximately 8000 kg/m³ for SUS316L structural parts
Kekonduksian Terma	14-16 W / (m · K) untuk keluli tahan karat austenit
Kemasan permukaan	Electropolished or fine-brushed SUS316L with smooth cleanable polymer lock surfaces
Jenis Bersatu	Flanged fixed port with double-door mechanical interlock and replaceable circumferential lip seals
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

105-460 mm nominal sizesManual or externally actuated openingStainless container or single-use bag interfaceBarrier-wall adapter flange

Planning a Rapid Transfer Port specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami