Circular rapid transfer port with fixed stainless barrier door

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

빠른 전송 포트

A fixed circular barrier port that docks with a compatible container or bag interface so both doors can open together without exposing their contaminated outer faces.

Double-Door Transfer Principle
Interlocked Circular Docking
Fixed Barrier Alpha Port
Multiple Useful Diameters

견적 요청 제품 찾아보기

상품 소개

The rapid transfer port mounts to an isolator, RABS or cleanroom wall and forms the fixed half of a double-door transfer system. A compatible removable container or bag port docks by guided rotation or another secure lock. The two doors couple so their exposed faces remain closed together while the combined opening provides access through the barrier. Mechanical interlocks prevent the fixed door from opening without a correctly connected counterpart and prevent undocking while the doors are open.

주요 기능

A fixed circular frame integrates directly into the barrier wall.

Mechanical interlocks enforce the correct dock-open-close-undock sequence.

Coupled doors isolate their previously exposed surfaces during transfer.

Replaceable lip seals maintain the connection around the selected port size.

Multiple diameters accommodate small components, tools, bags or containers.

고객 제품 관심사

A barrier port must prevent incorrect opening and keep the two exposed door faces isolated throughout connection and disconnection.

The barrier door can open without a transfer container.A mechanical interlock blocks the fixed door until the compatible port is fully docked.

The container is removed while the door remains open.The locking sequence prevents undocking until both door halves are closed.

Misalignment damages the seal during connection.Guide features and a defined rotational lock center the two circular interfaces.

One port size is unsuitable for both tools and bulk components.A family of useful diameters supports different transfer loads.

일반적인 응용 프로그램

Isolator material transferRABS component loadingSterile tool transferContained waste removal

기술 매개변수

Typical configurable construction ranges for a rapid transfer port are listed below.

핵심 재료	SUS316L fixed frame and door with engineering-polymer lock components and FDA-compatible silicone lip seals
패널 두께	30-80 mm compatible barrier-wall thickness
유효 폭	95-440 mm useful transfer diameter
최대 길이	Up to 460 mm nominal outer port diameter
강철 면면 두께	2.0-4.0 mm SUS316L frame and door components
코어 밀도	Approximately 8000 kg/m³ for SUS316L structural parts
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) 오스테나이트 스테인레스 스틸
표면 마무리	Electropolished or fine-brushed SUS316L with smooth cleanable polymer lock surfaces
접합 유형	Flanged fixed port with double-door mechanical interlock and replaceable circumferential lip seals
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

105-460 mm nominal sizesManual or externally actuated openingStainless container or single-use bag interfaceBarrier-wall adapter flange

Planning a Rapid Transfer Port specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.