Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistemas de Distribuição de Ar para Sala Limpa
Ducto de escape resistente à corrosão PP
A welded polypropylene duct system for extracting humid or chemically aggressive air that would rapidly attack ordinary galvanized steel ductwork.
- Chemical-Resistant PP Wall
- Thermoplastic Welded Seams
- Smooth Non-Metallic Interior
- Rectangular or Round Fabrication
Introdução do produto
Polypropylene exhaust ductwork provides a non-metallic path for corrosive vapors from laboratories, chemical rooms and wet processes. Straight sections and fittings are fabricated from homogeneous PP sheet or pipe, joined by hot-gas or extrusion welding to create continuous thermoplastic seams. Round duct is preferred for pressure stability, while rectangular sections integrate with scrubbers and equipment plenums. Supports allow for thermal expansion, and the selected PP grade is matched to the chemical concentration and operating temperature.
Características-chave
Thermoplastic welding creates continuous seams of compatible material rather than exposed mechanical folds.
The smooth low-surface-energy interior discourages residue adhesion and simplifies rinsing.
Lightweight fabricated sections reduce support loads compared with thick corrosion-resistant metal systems.
Preocupações do produto do cliente
Corrosive exhaust selection must consider the complete chemical mixture, condensate, temperature and thermal movement rather than material name alone.
Acidic condensate removes zinc coating and perforates steel exhaust duct.A compatible PP grade provides corrosion resistance through the full wall thickness.
Rigidly fixed plastic duct buckles as operating temperature changes.Guided supports and planned expansion sections allow controlled axial movement.
Poor field welds leave pinholes in hazardous exhaust seams.Qualified thermoplastic welding and visual seam inspection produce continuous fusion joints.
An incompatible solvent softens the selected plastic.Material selection is checked against the actual vapor and condensate composition before fabrication.
Aplicações típicas
Laboratory fume extractionChemical storage-room exhaustWet-process ventilationBattery manufacturing exhaustScrubber inlet and outlet ductwork
Parâmetros técnicos
Representative ranges for fabricated polypropylene corrosive-exhaust ductwork are listed below.
| Material principal | PP-H polypropylene sheet or extruded pipe |
|---|---|
| Painel de espessura | 3–10 mm, selected by section size and pressure |
| Largura efetiva | 110–1200 mm round diameter or rectangular side dimension |
| Comprimento máximo | 3000–5000 mm per fabricated straight section |
| Aço enfrentando espessura | 3–10 mm homogeneous PP wall in place of steel facing |
| Densidade Core | Approximately 900–920 kg/m³ solid polypropylene |
| Condutividade térmica | Approximately 0.22 W/(m·K) for polypropylene |
| Superfície acabado | Smooth natural gray PP surface with optional conductive black grade |
| Tipo conjunto | Hot-gas or extrusion-welded seam with welded flange or socket connection |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
PP-H, flame-retardant PP or conductive PPRound or rectangular geometryWelded inspection openings and drainsExpansion joints and scrubber transition pieces
Planning a PP Corrosion-Resistant Exhaust Duct specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
