English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة توزيع الهواء في الغرف النظيفة
PP قناة العادم مقاومة للتآكل
A welded polypropylene duct system for extracting humid or chemically aggressive air that would rapidly attack ordinary galvanized steel ductwork.
- Chemical-Resistant PP Wall
- Thermoplastic Welded Seams
- Smooth Non-Metallic Interior
- Rectangular or Round Fabrication
مقدمة المنتج
Polypropylene exhaust ductwork provides a non-metallic path for corrosive vapors from laboratories, chemical rooms and wet processes. Straight sections and fittings are fabricated from homogeneous PP sheet or pipe, joined by hot-gas or extrusion welding to create continuous thermoplastic seams. Round duct is preferred for pressure stability, while rectangular sections integrate with scrubbers and equipment plenums. Supports allow for thermal expansion, and the selected PP grade is matched to the chemical concentration and operating temperature.
الخصائص الرئيسية
Thermoplastic welding creates continuous seams of compatible material rather than exposed mechanical folds.
The smooth low-surface-energy interior discourages residue adhesion and simplifies rinsing.
Lightweight fabricated sections reduce support loads compared with thick corrosion-resistant metal systems.
مخاوف المنتج للعملاء
Corrosive exhaust selection must consider the complete chemical mixture, condensate, temperature and thermal movement rather than material name alone.
Acidic condensate removes zinc coating and perforates steel exhaust duct.A compatible PP grade provides corrosion resistance through the full wall thickness.
Rigidly fixed plastic duct buckles as operating temperature changes.Guided supports and planned expansion sections allow controlled axial movement.
Poor field welds leave pinholes in hazardous exhaust seams.Qualified thermoplastic welding and visual seam inspection produce continuous fusion joints.
An incompatible solvent softens the selected plastic.Material selection is checked against the actual vapor and condensate composition before fabrication.
تطبيقات نموذجية
Laboratory fume extractionChemical storage-room exhaustWet-process ventilationBattery manufacturing exhaustScrubber inlet and outlet ductwork
المعلمات الفنية
Representative ranges for fabricated polypropylene corrosive-exhaust ductwork are listed below.
| المواد الأساسية | PP-H polypropylene sheet or extruded pipe |
|---|---|
| سمك اللوحة | 3–10 mm, selected by section size and pressure |
| العرض الفعال | 110–1200 mm round diameter or rectangular side dimension |
| الحد الأقصى الطول | 3000–5000 mm per fabricated straight section |
| الصلب يواجه سمك | 3–10 mm homogeneous PP wall in place of steel facing |
| الكثافة الأساسية | Approximately 900–920 kg/m³ solid polypropylene |
| الموصلية الحرارية | Approximately 0.22 W/(m·K) for polypropylene |
| إنهاء السطح | Smooth natural gray PP surface with optional conductive black grade |
| نوع المشترك | Hot-gas or extrusion-welded seam with welded flange or socket connection |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
PP-H, flame-retardant PP or conductive PPRound or rectangular geometryWelded inspection openings and drainsExpansion joints and scrubber transition pieces
Planning a PP Corrosion-Resistant Exhaust Duct specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
