Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Portas de sala limpa, janelas e sistemas de bloqueio
Porta de sala limpa de aço revestida em pó
A robust 50 mm flush doorset with powder-coated galvanized steel facings, a sealed perimeter and a lightweight honeycomb core for routine personnel and material access.
- 50 mm Flush Steel Leaf
- Durable Powder-Coated Face
- Automatic Bottom Seal Option
- Flush Vision Panel Available
Introdução do produto
The Powder-Coated Steel Cleanroom Door uses folded galvanized steel skins bonded around an aluminum honeycomb core and closed by a matching steel or aluminum frame. Smooth faces, sealed leaf edges and clean-profile hardware reduce ledges around the opening. The construction gives busy production routes better dent resistance than lightweight decorative doors while remaining easier to operate than a solid metal leaf.
Características-chave
Bonded honeycomb stabilizes the broad leaf without excessive operating weight.
Flush frame geometry integrates with modular wall panels or prepared solid-wall openings.
A concealed drop seal can close the floor gap only when the leaf reaches the frame.
Vision panels, interlock magnets and access-control hardware can be factory prepared.
Preocupações do produto do cliente
Steel cleanroom door buyers need a practical balance of impact resistance, easy cleaning, manageable leaf weight and reliable sealing.
Thin decorative door skins dent and flex after repeated cart contact.Formed galvanized steel facings and bonded honeycomb distribute local impact across the leaf.
Deep beads and exposed screws collect residue around the doorway.Flush glazing trims and concealed frame fixings preserve a smooth wipeable room face.
A fixed floor sweep drags, sheds particles and increases opening effort.An automatic drop seal remains raised during movement and lowers only in the closed position.
Retrofitted locks and interlock magnets leave rough site-cut openings.Factory hardware reinforcement and prepared cable routes keep functional equipment integrated.
Aplicações típicas
Pharmaceutical production corridorsMedical-device assembly roomsElectronics clean manufacturingClean packaging areasControlled laboratory entrances
Parâmetros técnicos
Typical construction values for a powder-coated steel cleanroom personnel door are shown below.
| Material principal | Bonded aluminum honeycomb |
|---|---|
| Painel de espessura | 50 mm door leaf |
| Largura efetiva | 700-1200 mm single-leaf clear opening |
| Comprimento máximo | 2400 mm maximum leaf height |
| Aço enfrentando espessura | 0.8-1.0 mm galvanized steel leaf skins |
| Densidade Core | 40-70 kg/m³ aluminum honeycomb |
| Condutividade térmica | 0.06-0.10 W/(m·K) typical honeycomb core range |
| Superfície acabado | Smooth polyester powder coating in cleanroom white or selected RAL colour |
| Tipo conjunto | Flush rebated frame with compressible perimeter gasket and optional automatic drop seal |
| Customização | Disponível com base na aplicação pretendida e ambiente operacional |
Opções disponíveis
Double-glazed flush vision panelStainless steel kick plateDoor closer and panic hardwareInterlock or access-control preparation
Planning a Powder-Coated Steel Cleanroom Door specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
