Complete powder-coated steel cleanroom door with flush frame and vision panel

Двери в чистых помещениях, окна и системы блокировки

Стальная дверь чистой комнаты с порошковым покрытием

A robust 50 mm flush doorset with powder-coated galvanized steel facings, a sealed perimeter and a lightweight honeycomb core for routine personnel and material access.

50 mm Flush Steel Leaf
Durable Powder-Coated Face
Automatic Bottom Seal Option
Flush Vision Panel Available

Запрос котировки Просмотреть продукты

Введение продукции

The Powder-Coated Steel Cleanroom Door uses folded galvanized steel skins bonded around an aluminum honeycomb core and closed by a matching steel or aluminum frame. Smooth faces, sealed leaf edges and clean-profile hardware reduce ledges around the opening. The construction gives busy production routes better dent resistance than lightweight decorative doors while remaining easier to operate than a solid metal leaf.

Основные характеристики

Powder-coated galvanized facings tolerate frequent wiping and everyday trolley contact.

Bonded honeycomb stabilizes the broad leaf without excessive operating weight.

Flush frame geometry integrates with modular wall panels or prepared solid-wall openings.

A concealed drop seal can close the floor gap only when the leaf reaches the frame.

Vision panels, interlock magnets and access-control hardware can be factory prepared.

Обеспокоенность клиентов продуктами

Steel cleanroom door buyers need a practical balance of impact resistance, easy cleaning, manageable leaf weight and reliable sealing.

Thin decorative door skins dent and flex after repeated cart contact.Formed galvanized steel facings and bonded honeycomb distribute local impact across the leaf.

Deep beads and exposed screws collect residue around the doorway.Flush glazing trims and concealed frame fixings preserve a smooth wipeable room face.

A fixed floor sweep drags, sheds particles and increases opening effort.An automatic drop seal remains raised during movement and lowers only in the closed position.

Retrofitted locks and interlock magnets leave rough site-cut openings.Factory hardware reinforcement and prepared cable routes keep functional equipment integrated.

Типичные приложения

Pharmaceutical production corridorsMedical-device assembly roomsElectronics clean manufacturingClean packaging areasControlled laboratory entrances

Технические параметры

Typical construction values for a powder-coated steel cleanroom personnel door are shown below.

Основной материал	Bonded aluminum honeycomb
Толщина панели	50 mm door leaf
эффективная ширина	700-1200 mm single-leaf clear opening
Максимальная длина	2400 mm maximum leaf height
Толщина линий стали	0.8-1.0 mm galvanized steel leaf skins
Плотность ядра	40-70 kg/m³ aluminum honeycomb
Теплопроводимость	0.06-0.10 W/(m·K) typical honeycomb core range
Поверхностная отделка	Smooth polyester powder coating in cleanroom white or selected RAL colour
Объединенный тип	Flush rebated frame with compressible perimeter gasket and optional automatic drop seal
Customization	Доступно в зависимости от предполагаемого приложения и операционной среды

Доступные варианты

Double-glazed flush vision panelStainless steel kick plateDoor closer and panic hardwareInterlock or access-control preparation

Planning a Powder-Coated Steel Cleanroom Door specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой