Complete powder-coated steel cleanroom door with flush frame and vision panel

클린룸 도어, 창문 및 인터락 시스템

파우더 코팅 강철 클린룸 도어

A robust 50 mm flush doorset with powder-coated galvanized steel facings, a sealed perimeter and a lightweight honeycomb core for routine personnel and material access.

50 mm Flush Steel Leaf
Durable Powder-Coated Face
Automatic Bottom Seal Option
Flush Vision Panel Available

견적 요청 제품 찾아보기

상품 소개

The Powder-Coated Steel Cleanroom Door uses folded galvanized steel skins bonded around an aluminum honeycomb core and closed by a matching steel or aluminum frame. Smooth faces, sealed leaf edges and clean-profile hardware reduce ledges around the opening. The construction gives busy production routes better dent resistance than lightweight decorative doors while remaining easier to operate than a solid metal leaf.

주요 기능

Powder-coated galvanized facings tolerate frequent wiping and everyday trolley contact.

Bonded honeycomb stabilizes the broad leaf without excessive operating weight.

Flush frame geometry integrates with modular wall panels or prepared solid-wall openings.

A concealed drop seal can close the floor gap only when the leaf reaches the frame.

Vision panels, interlock magnets and access-control hardware can be factory prepared.

고객 제품 관심사

Steel cleanroom door buyers need a practical balance of impact resistance, easy cleaning, manageable leaf weight and reliable sealing.

Thin decorative door skins dent and flex after repeated cart contact.Formed galvanized steel facings and bonded honeycomb distribute local impact across the leaf.

Deep beads and exposed screws collect residue around the doorway.Flush glazing trims and concealed frame fixings preserve a smooth wipeable room face.

A fixed floor sweep drags, sheds particles and increases opening effort.An automatic drop seal remains raised during movement and lowers only in the closed position.

Retrofitted locks and interlock magnets leave rough site-cut openings.Factory hardware reinforcement and prepared cable routes keep functional equipment integrated.

일반적인 응용 프로그램

제약 생산 코리더Medical-device assembly roomsElectronics clean manufacturingClean packaging areasControlled laboratory entrances

기술 매개변수

Typical construction values for a powder-coated steel cleanroom personnel door are shown below.

핵심 재료	Bonded aluminum honeycomb
패널 두께	50 mm door leaf
유효 폭	700-1200 mm single-leaf clear opening
최대 길이	2400 mm maximum leaf height
강철 면면 두께	0.8-1.0 mm galvanized steel leaf skins
코어 밀도	40-70 kg/m³ aluminum honeycomb
열전도도 (Thermal Conductivity)	0.06-0.10 W/(m·K) typical honeycomb core range
표면 마무리	Smooth polyester powder coating in cleanroom white or selected RAL colour
접합 유형	Flush rebated frame with compressible perimeter gasket and optional automatic drop seal
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

Double-glazed flush vision panelStainless steel kick plateDoor closer and panic hardwareInterlock or access-control preparation

Planning a Powder-Coated Steel Cleanroom Door specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.