Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de sala limpa Peças de reposição
Z Controlador de bloqueio Pass Box
A compact electronic module that coordinates two pass box doors, lock outputs, status indication and timed transfer sequences.
- Two-Door Interlock Logic
- Visible Status Indication
- Removable Terminal Blocks
- Service-Friendly Replacement
Introdução do produto
The pass box interlock controller is the central logic module for a two-door cleanroom transfer chamber. It reads door-position and request signals, energizes the appropriate electric lock, prevents both doors from being released together and provides local operating status. A compact flame-retardant enclosure, removable screw terminals and plug connectors simplify replacement inside an equipment compartment. Electrical supply, input type, lock voltage, output loading, timing logic and connector pinout must be matched to the existing pass box before installation.
Características-chave
A numeric display and separate status LEDs support rapid operating checks.
Removable terminal blocks allow field wiring to remain organized during module replacement.
Membrane keys provide local access to timing and operating adjustments without an external programmer.
Preocupações do produto do cliente
A replacement controller must reproduce the existing door sequence and electrical interfaces without defeating the transfer chamber interlock.
Incorrect interlock logic can permit both doors to unlock at the same time.Two-door sequencing is configured so one release output remains inhibited while the opposite door is open or unlocked.
An incompatible lock output may overload the controller or fail to release the door.Supply voltage, output type and allowable load are matched to the installed electromagnetic or electric-bolt locks.
Unclear fault status makes a failed sensor difficult to distinguish from a lock problem.Display and indicator states provide direct feedback for door requests, interlock state and connected input conditions.
Rewiring a replacement module increases downtime and connection errors.Detachable terminal blocks and keyed plug interfaces support labeled, one-for-one service replacement.
Aplicações típicas
Static cleanroom pass boxesDynamic pass-through chambersMaterial transfer hatchesReplacement controls for interlocked transfer cabinets
Parâmetros técnicos
Typical construction and integration ranges for pass box interlock control modules are shown below.
| Material principal | Flame-retardant engineering-plastic enclosure with printed circuit assembly and copper terminals |
|---|---|
| Painel de espessura | 25-55 mm nominal controller enclosure depth |
| Largura efetiva | 90-180 mm nominal module width |
| Comprimento máximo | Up to 240 mm overall length including terminal and plug clearance |
| Aço enfrentando espessura | 0.8-1.5 mm for optional galvanized mounting plate |
| Densidade Core | 1150-1450 kg/m³ for the engineering-plastic enclosure |
| Condutividade térmica | 0.20-0.35 W/(m·K) for the enclosure material |
| Superfície acabado | Textured black molded housing with green removable terminals and white keyed connectors |
| Tipo conjunto | Screw-terminal field connections with keyed multi-pin plug interfaces and flange mounting |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Matched AC or DC supply inputElectromagnetic-lock or electric-bolt output logicBuzzer and indicator-light interfacesCustom timing and connector pinout
Planning a Pass Box Interlock Controller specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
