Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Equipment Ersatzteile
Pass Box Interlock Controller
A compact electronic module that coordinates two pass box doors, lock outputs, status indication and timed transfer sequences.
- Two-Door Interlock Logic
- Visible Status Indication
- Removable Terminal Blocks
- Service-Friendly Replacement
Produkteinführung
The pass box interlock controller is the central logic module for a two-door cleanroom transfer chamber. It reads door-position and request signals, energizes the appropriate electric lock, prevents both doors from being released together and provides local operating status. A compact flame-retardant enclosure, removable screw terminals and plug connectors simplify replacement inside an equipment compartment. Electrical supply, input type, lock voltage, output loading, timing logic and connector pinout must be matched to the existing pass box before installation.
Key Features
A numeric display and separate status LEDs support rapid operating checks.
Removable terminal blocks allow field wiring to remain organized during module replacement.
Membrane keys provide local access to timing and operating adjustments without an external programmer.
Kunden Produktbedenken
A replacement controller must reproduce the existing door sequence and electrical interfaces without defeating the transfer chamber interlock.
Incorrect interlock logic can permit both doors to unlock at the same time.Two-door sequencing is configured so one release output remains inhibited while the opposite door is open or unlocked.
An incompatible lock output may overload the controller or fail to release the door.Supply voltage, output type and allowable load are matched to the installed electromagnetic or electric-bolt locks.
Unclear fault status makes a failed sensor difficult to distinguish from a lock problem.Display and indicator states provide direct feedback for door requests, interlock state and connected input conditions.
Rewiring a replacement module increases downtime and connection errors.Detachable terminal blocks and keyed plug interfaces support labeled, one-for-one service replacement.
Typische Anwendungen
Statische Reinraum-Pass - BoxenDynamic pass-through chambersMaterial transfer hatchesReplacement controls for interlocked transfer cabinets
Technische Parameter
Typical construction and integration ranges for pass box interlock control modules are shown below.
| Core Material | Flame-retardant engineering-plastic enclosure with printed circuit assembly and copper terminals |
|---|---|
| Panel Dicke | 25-55 mm nominal controller enclosure depth |
| Effektive Breite | 90-180 mm nominal module width |
| Maximale Länge | Up to 240 mm overall length including terminal and plug clearance |
| Stahl facing Dicke | 0.8-1.5 mm for optional galvanized mounting plate |
| Kerndichte | 1150-1450 kg/m³ for the engineering-plastic enclosure |
| Thermische Leitfähigkeit | 0.20-0.35 W/(m·K) for the enclosure material |
| Oberfläche Finish | Textured black molded housing with green removable terminals and white keyed connectors |
| Gemeinsamer Typ | Screw-terminal field connections with keyed multi-pin plug interfaces and flange mounting |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Matched AC or DC supply inputElectromagnetic-lock or electric-bolt output logicBuzzer and indicator-light interfacesCustom timing and connector pinout
Planning a Pass Box Interlock Controller specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
