Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Filtros de ar e filtragem química
Filtro HEPA Mini-Plate
A lightweight separatorless HEPA panel that uses hot-melt-spaced microglass pleats to maximize active area and minimize airflow resistance.
- Separatorless Mini-Pleats
- Baixa Pressão Drop
- Lightweight Aluminum Frame
- Compact Cleanroom Format
Introdução do produto
The mini-pleat HEPA filter uses microfine glass-fiber media folded into closely spaced pleats and stabilized with continuous thermoplastic beads instead of corrugated metal separators. Precise bead spacing prevents media-to-media contact and creates many narrow, uniform flow channels. A polyurethane seal bonds the single pack into an extruded anodized-aluminum frame, while optional faceguards protect the exposed surfaces. The high media area and shallow profile make this design suitable for cleanroom ceilings, laminar-flow equipment and compact terminal housings.
Características-chave
Closely controlled pleat geometry provides a large active HEPA area in a shallow panel.
Extruded aluminum cell sides keep the filter square while resisting normal cleanroom cleaning agents.
Polyurethane potting seals the complete media perimeter without leaving internal bypass paths.
Preocupações do produto do cliente
A mini-pleat HEPA panel must combine delicate high-efficiency media with precise spacing and reliable edge sealing.
Metal-separated HEPA cells are too heavy for dense ceiling-grid layouts.Separatorless hot-melt pleats and extruded aluminum sides reduce weight while retaining media area.
Closely packed media faces touch and create blocked channels.Continuous calibrated adhesive beads maintain exact spacing along every pleat.
Thin HEPA media tears when the panel is carried by its face.Recessed media and optional protective grids isolate the pleat surface from routine handling.
Leakage develops at the junction between the pack and aluminum extrusion.Four-sided urethane potting forms a continuous bond inside the frame cavity.
Aplicações típicas
Cleanroom ceiling filter gridsLaminar-flow workstationsFan filter unitsHospital operating suitesSemiconductor and pharmaceutical process areas
Parâmetros técnicos
Typical construction ranges for a separatorless mini-pleat HEPA panel are shown below.
| Material principal | Microfine glass-fiber HEPA media with continuous thermoplastic bead separators |
|---|---|
| Painel de espessura | 53, 70 or 100 mm mini-pleat pack depth |
| Largura efetiva | 305-610 mm cleanroom module width |
| Comprimento máximo | Up to 1220 mm panel length with reinforced aluminum extrusion |
| Aço enfrentando espessura | 0.40-0.60 mm powder-coated steel or stainless-steel protective faceguard |
| Densidade Core | Approximately 80-140 kg/m³ nominal assembled mini-pleat pack density |
| Condutividade térmica | Approximately 0.034-0.041 W/(m·K) for dry resin-bonded mini-pleat microglass media |
| Superfície acabado | White microglass media in clear anodized aluminum with optional white faceguards |
| Tipo conjunto | Hot-melt-spaced mini-pleat pack fully potted into an extruded-aluminum perimeter frame |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
H13, H14 or ULPA-grade media53 mm, 70 mm or 100 mm pack depthMicroglass or low-resistance membrane mediaGasket, gel-channel or integral knife-edge frame
Planning a Mini-Pleat HEPA Filter specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
