Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Filtres à air et filtration chimique
Filtre HEPA mini-plate
A lightweight separatorless HEPA panel that uses hot-melt-spaced microglass pleats to maximize active area and minimize airflow resistance.
- Separatorless Mini-Pleats
- Basse pression Drop
- Lightweight Aluminum Frame
- Compact Cleanroom Format
Introduction de produit
The mini-pleat HEPA filter uses microfine glass-fiber media folded into closely spaced pleats and stabilized with continuous thermoplastic beads instead of corrugated metal separators. Precise bead spacing prevents media-to-media contact and creates many narrow, uniform flow channels. A polyurethane seal bonds the single pack into an extruded anodized-aluminum frame, while optional faceguards protect the exposed surfaces. The high media area and shallow profile make this design suitable for cleanroom ceilings, laminar-flow equipment and compact terminal housings.
Key Features
Closely controlled pleat geometry provides a large active HEPA area in a shallow panel.
Extruded aluminum cell sides keep the filter square while resisting normal cleanroom cleaning agents.
Polyurethane potting seals the complete media perimeter without leaving internal bypass paths.
Préoccupations du client produit
A mini-pleat HEPA panel must combine delicate high-efficiency media with precise spacing and reliable edge sealing.
Metal-separated HEPA cells are too heavy for dense ceiling-grid layouts.Separatorless hot-melt pleats and extruded aluminum sides reduce weight while retaining media area.
Closely packed media faces touch and create blocked channels.Continuous calibrated adhesive beads maintain exact spacing along every pleat.
Thin HEPA media tears when the panel is carried by its face.Recessed media and optional protective grids isolate the pleat surface from routine handling.
Leakage develops at the junction between the pack and aluminum extrusion.Four-sided urethane potting forms a continuous bond inside the frame cavity.
Les applications typiques
Cleanroom ceiling filter gridsLaminar-flow workstationsFan filter unitsHospital operating suitesSemiconductor and pharmaceutical process areas
Paramètres techniques
Typical construction ranges for a separatorless mini-pleat HEPA panel are shown below.
| Matériaux de base | Microfine glass-fiber HEPA media with continuous thermoplastic bead separators |
|---|---|
| Panneau épaisseur | 53, 70 or 100 mm mini-pleat pack depth |
| Largeur effective | 305-610 mm cleanroom module width |
| Longueur maximale | Up to 1220 mm panel length with reinforced aluminum extrusion |
| Acier face épaisseur | 0.40-0.60 mm powder-coated steel or stainless-steel protective faceguard |
| Densité Core | Approximately 80-140 kg/m³ nominal assembled mini-pleat pack density |
| Conductivité thermique | Approximately 0.034-0.041 W/(m·K) for dry resin-bonded mini-pleat microglass media |
| surface finie | White microglass media in clear anodized aluminum with optional white faceguards |
| Type joint | Hot-melt-spaced mini-pleat pack fully potted into an extruded-aluminum perimeter frame |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
H13, H14 or ULPA-grade media53 mm, 70 mm or 100 mm pack depthMicroglass or low-resistance membrane mediaGasket, gel-channel or integral knife-edge frame
Planning a Mini-Pleat HEPA Filter specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
