English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
مرشحات الهواء والترشيح الكيميائي
Mini-Plate فلتر HEPA
A lightweight separatorless HEPA panel that uses hot-melt-spaced microglass pleats to maximize active area and minimize airflow resistance.
- Separatorless Mini-Pleats
- انخفاض الضغط انخفاض
- Lightweight Aluminum Frame
- Compact Cleanroom Format
مقدمة المنتج
The mini-pleat HEPA filter uses microfine glass-fiber media folded into closely spaced pleats and stabilized with continuous thermoplastic beads instead of corrugated metal separators. Precise bead spacing prevents media-to-media contact and creates many narrow, uniform flow channels. A polyurethane seal bonds the single pack into an extruded anodized-aluminum frame, while optional faceguards protect the exposed surfaces. The high media area and shallow profile make this design suitable for cleanroom ceilings, laminar-flow equipment and compact terminal housings.
الخصائص الرئيسية
Closely controlled pleat geometry provides a large active HEPA area in a shallow panel.
Extruded aluminum cell sides keep the filter square while resisting normal cleanroom cleaning agents.
Polyurethane potting seals the complete media perimeter without leaving internal bypass paths.
مخاوف المنتج للعملاء
A mini-pleat HEPA panel must combine delicate high-efficiency media with precise spacing and reliable edge sealing.
Metal-separated HEPA cells are too heavy for dense ceiling-grid layouts.Separatorless hot-melt pleats and extruded aluminum sides reduce weight while retaining media area.
Closely packed media faces touch and create blocked channels.Continuous calibrated adhesive beads maintain exact spacing along every pleat.
Thin HEPA media tears when the panel is carried by its face.Recessed media and optional protective grids isolate the pleat surface from routine handling.
Leakage develops at the junction between the pack and aluminum extrusion.Four-sided urethane potting forms a continuous bond inside the frame cavity.
تطبيقات نموذجية
Cleanroom ceiling filter gridsمحطات عمل التدفق الصفائقيFan filter unitsHospital operating suitesSemiconductor and pharmaceutical process areas
المعلمات الفنية
Typical construction ranges for a separatorless mini-pleat HEPA panel are shown below.
| المواد الأساسية | Microfine glass-fiber HEPA media with continuous thermoplastic bead separators |
|---|---|
| سمك اللوحة | 53, 70 or 100 mm mini-pleat pack depth |
| العرض الفعال | 305-610 mm cleanroom module width |
| الحد الأقصى الطول | Up to 1220 mm panel length with reinforced aluminum extrusion |
| الصلب يواجه سمك | 0.40-0.60 mm powder-coated steel or stainless-steel protective faceguard |
| الكثافة الأساسية | Approximately 80-140 kg/m³ nominal assembled mini-pleat pack density |
| الموصلية الحرارية | Approximately 0.034-0.041 W/(m·K) for dry resin-bonded mini-pleat microglass media |
| إنهاء السطح | White microglass media in clear anodized aluminum with optional white faceguards |
| نوع المشترك | Hot-melt-spaced mini-pleat pack fully potted into an extruded-aluminum perimeter frame |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
H13, H14 or ULPA-grade media53 mm, 70 mm or 100 mm pack depthMicroglass or low-resistance membrane mediaGasket, gel-channel or integral knife-edge frame
Planning a Mini-Pleat HEPA Filter specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
