Complete mobile medical air disinfection unit in front-right-top view with intake grille, control panel, outlet louvers, casters and power cord

Equipamento de sala limpa específico da indústria

Unidade de desinfecção do ar médico

A mobile room-air recirculation cabinet with staged prefiltration, gasket-sealed HEPA filtration, enclosed UV-C treatment and separated front return and supply grilles.

Enclosed UV-C Air Path
Prefilter and HEPA Stages
Mobile Recirculation Cabinet
Interlocked Service Access

Solicite um orçamento. Browse produtos

Introdução do produto

The Medical Air Disinfection Unit is a self-contained mobile cabinet for supplementary air cleaning in occupied healthcare spaces. Room air enters through the lower front grille, passes a replaceable coarse prefilter and a gasket-sealed deep-pleat HEPA stage, then travels through a shielded internal UV-C treatment chamber before the fan returns filtered air through the upper front louvers. A light-gray powder-coated steel enclosure separates the service path from the occupied room, while the right-side access door provides direct filter and lamp-compartment maintenance without exposed UV during normal operation. The front display, three operating buttons and separate green and amber indicators provide local status at a glance. This recirculation unit does not establish room negative pressure, provide outdoor-air ventilation or connect to an exhaust duct.

Características-chave

Separated lower intake and upper supply openings promote room-air circulation without an external duct or exhaust hose.

A shallow prefilter protects the gasketed HEPA cartridge, and both stages are retained on defined service rails to limit bypass.

The UV-C source remains inside a closed reflective chamber, with service-door interruption preventing routine exposure when access is opened.

Four braked swivel casters, a recessed transport handle, detachable power cord and front status controls support relocation between suitable clinical rooms.

Preocupações do produto do cliente

Supplementary clinical air cleaning must move useful room air through a controlled treatment path while avoiding filter bypass, accessible UV exposure and cumbersome service work.

A distant central return grille may provide limited local aerosol removal where patients and staff gather.The mobile cabinet draws room air through a dedicated lower intake and returns treated air from the upper front outlet near the selected occupied zone.

Poorly seated filters can allow collected air to bypass the intended high-efficiency media.A guided prefilter stage and gasket-compressed HEPA cartridge maintain a defined, inspectable recirculation path behind the latched service door.

An accessible germicidal lamp can create an eye and skin exposure hazard during inspection or filter changes.The UV-C source is enclosed in its own metal chamber, and opening the service access interrupts operation before the treatment section is reached.

A fixed or difficult-to-clean unit may be left in an ineffective location or kept in service after filters load.Lockable casters and a recessed handle simplify placement, while the front status area and one-side service route make routine inspection easier to schedule.

Aplicações típicas

Hospital and clinic waiting roomsOutpatient treatment and observation roomsNursing-care and rehabilitation spacesTemporary supplementary air cleaning in clinical support areas

Parâmetros técnicos

Typical configurable construction values for a mobile HEPA and enclosed UV-C medical room-air recirculation unit are listed below.

Material principal	Synthetic-fiber prefilter, gasketed mini-pleat HEPA cartridge and enclosed UV-C reaction chamber in a powder-coated galvanized-steel cabinet
Painel de espessura	25-40 mm reinforced folded-steel cabinet and service-door section
Largura efetiva	400-500 mm nominal cabinet width
Comprimento máximo	Up to 950 mm overall cabinet height including casters
Aço enfrentando espessura	0.8-1.2 mm powder-coated galvanized-steel sheet
Densidade Core	7850 kg/m³ for carbon-steel cabinet sheet
Condutividade térmica	48 W/(m·K) for carbon steel at room temperature
Superfície acabado	RAL 7035 light-gray hygienic powder coat with charcoal grilles, controls, handle, latches and caster hardware
Tipo conjunto	Gasketed quarter-turn service door with filter guide rails, compressed HEPA perimeter seal and interlocked enclosed UV-C compartment
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

HEPA grade and clean-air capacity selected for the room volume and intended placementVariable-speed control and upper-outlet deflector configurationPowder-coated galvanized steel or AISI 304 stainless outer enclosureRemote run, lamp-status and filter-service alarm contacts

Planning a Medical Air Disinfection Unit specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe