Tıbbi Hava Dezenfeksiyon Birimi
- Enclosed UV-C Air Path
- Prefilter and HEPA Stages
- Mobile Recirculation Cabinet
- Interlocked Service Access
Ürün tanıtımı
The Medical Air Disinfection Unit is a self-contained mobile cabinet for supplementary air cleaning in occupied healthcare spaces. Room air enters through the lower front grille, passes a replaceable coarse prefilter and a gasket-sealed deep-pleat HEPA stage, then travels through a shielded internal UV-C treatment chamber before the fan returns filtered air through the upper front louvers. A light-gray powder-coated steel enclosure separates the service path from the occupied room, while the right-side access door provides direct filter and lamp-compartment maintenance without exposed UV during normal operation. The front display, three operating buttons and separate green and amber indicators provide local status at a glance. This recirculation unit does not establish room negative pressure, provide outdoor-air ventilation or connect to an exhaust duct.
Ana Özellikler
A shallow prefilter protects the gasketed HEPA cartridge, and both stages are retained on defined service rails to limit bypass.
The UV-C source remains inside a closed reflective chamber, with service-door interruption preventing routine exposure when access is opened.
Four braked swivel casters, a recessed transport handle, detachable power cord and front status controls support relocation between suitable clinical rooms.
Müşteri Ürün Sorunları
Supplementary clinical air cleaning must move useful room air through a controlled treatment path while avoiding filter bypass, accessible UV exposure and cumbersome service work.
Tipik uygulamalar
Teknik parametreler
Typical configurable construction values for a mobile HEPA and enclosed UV-C medical room-air recirculation unit are listed below.
| Temel malzemeler | Synthetic-fiber prefilter, gasketed mini-pleat HEPA cartridge and enclosed UV-C reaction chamber in a powder-coated galvanized-steel cabinet |
|---|---|
| Panel kalınlığı | 25-40 mm reinforced folded-steel cabinet and service-door section |
| Effective Width (Etkili Genişlik) | 400-500 mm nominal cabinet width |
| Maksimum uzunluk | Up to 950 mm overall cabinet height including casters |
| Çelik yüz yüze kalınlığı | 0.8-1.2 mm powder-coated galvanized-steel sheet |
| Core Density (Çekirdek Yoğunluğu) | 7850 kg/m³ for carbon-steel cabinet sheet |
| Termal İletkenlik | 48 W/(m·K) for carbon steel at room temperature |
| Yüzey bitirme | RAL 7035 light-gray hygienic powder coat with charcoal grilles, controls, handle, latches and caster hardware |
| Ortak tip | Gasketed quarter-turn service door with filter guide rails, compressed HEPA perimeter seal and interlocked enclosed UV-C compartment |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Planning a Medical Air Disinfection Unit specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca