Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại
Thiết bị phòng sạch cụ thể cho ngành
Đơn vị khử trùng không khí y tế
A mobile room-air recirculation cabinet with staged prefiltration, gasket-sealed HEPA filtration, enclosed UV-C treatment and separated front return and supply grilles.
- Enclosed UV-C Air Path
- Prefilter and HEPA Stages
- Mobile Recirculation Cabinet
- Interlocked Service Access
Giới thiệu Sản phẩm
The Medical Air Disinfection Unit is a self-contained mobile cabinet for supplementary air cleaning in occupied healthcare spaces. Room air enters through the lower front grille, passes a replaceable coarse prefilter and a gasket-sealed deep-pleat HEPA stage, then travels through a shielded internal UV-C treatment chamber before the fan returns filtered air through the upper front louvers. A light-gray powder-coated steel enclosure separates the service path from the occupied room, while the right-side access door provides direct filter and lamp-compartment maintenance without exposed UV during normal operation. The front display, three operating buttons and separate green and amber indicators provide local status at a glance. This recirculation unit does not establish room negative pressure, provide outdoor-air ventilation or connect to an exhaust duct.
Các tính năng chính
A shallow prefilter protects the gasketed HEPA cartridge, and both stages are retained on defined service rails to limit bypass.
The UV-C source remains inside a closed reflective chamber, with service-door interruption preventing routine exposure when access is opened.
Four braked swivel casters, a recessed transport handle, detachable power cord and front status controls support relocation between suitable clinical rooms.
Các mối quan tâm về sản phẩm của khách hàng
Supplementary clinical air cleaning must move useful room air through a controlled treatment path while avoiding filter bypass, accessible UV exposure and cumbersome service work.
A distant central return grille may provide limited local aerosol removal where patients and staff gather.The mobile cabinet draws room air through a dedicated lower intake and returns treated air from the upper front outlet near the selected occupied zone.
Poorly seated filters can allow collected air to bypass the intended high-efficiency media.A guided prefilter stage and gasket-compressed HEPA cartridge maintain a defined, inspectable recirculation path behind the latched service door.
An accessible germicidal lamp can create an eye and skin exposure hazard during inspection or filter changes.The UV-C source is enclosed in its own metal chamber, and opening the service access interrupts operation before the treatment section is reached.
A fixed or difficult-to-clean unit may be left in an ineffective location or kept in service after filters load.Lockable casters and a recessed handle simplify placement, while the front status area and one-side service route make routine inspection easier to schedule.
Các ứng dụng điển hình
Hospital and clinic waiting roomsOutpatient treatment and observation roomsNursing-care and rehabilitation spacesTemporary supplementary air cleaning in clinical support areas
Thông số kỹ thuật
Typical configurable construction values for a mobile HEPA and enclosed UV-C medical room-air recirculation unit are listed below.
| Vật liệu lõi | Synthetic-fiber prefilter, gasketed mini-pleat HEPA cartridge and enclosed UV-C reaction chamber in a powder-coated galvanized-steel cabinet |
|---|---|
| Độ dày bảng điều khiển | 25-40 mm reinforced folded-steel cabinet and service-door section |
| Chiều rộng hiệu quả | 400-500 mm nominal cabinet width |
| Chiều dài tối đa | Up to 950 mm overall cabinet height including casters |
| Thép đối mặt với độ dày | 0.8-1.2 mm powder-coated galvanized-steel sheet |
| Mật độ lõi | 7850 kg/m³ for carbon-steel cabinet sheet |
| Độ dẫn nhiệt | 48 W/(m·K) for carbon steel at room temperature |
| Kết thúc bề mặt | RAL 7035 light-gray hygienic powder coat with charcoal grilles, controls, handle, latches and caster hardware |
| Loại khớp nối | Gasketed quarter-turn service door with filter guide rails, compressed HEPA perimeter seal and interlocked enclosed UV-C compartment |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Các tùy chọn có sẵn
HEPA grade and clean-air capacity selected for the room volume and intended placementVariable-speed control and upper-outlet deflector configurationPowder-coated galvanized steel or AISI 304 stainless outer enclosureRemote run, lamp-status and filter-service alarm contacts
Planning a Medical Air Disinfection Unit specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.
