Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
ESD e produtos antiestáticos
ESD embalagem bolsa
The ESD Packaging Bag is a transparent pink low-charging polyethylene pouch for organizing non-shielding component packages inside controlled ESD work areas.
- Low-charging polyethylene reduces triboelectric charge generation during routine handling.
- Transparent pink film allows labels and components to remain visible.
- Resealable zipper supports repeated transfers within an ESD protected area.
Introdução do produto
The pouch is formed from light-pink low-density polyethylene with an antistatic formulation and a smooth interior surface. It is intended for routine organization, kitting and short-term movement within a protected environment where discharge shielding is not required. Heat-welded side seams and an integral zipper provide a lightweight reusable closure. The film remains transparent enough for barcode, label and content inspection.
Características-chave
Light-pink identification distinguishes the bag from ordinary clear packaging.
Transparent film keeps component labels visible.
Integral zipper enables repeated opening without a separate fastener.
Flexible film conforms around small parts and kits.
Wide welded edges reduce seam splitting during normal handling.
Multiple bag sizes support organized line-side inventory.
Preocupações do produto do cliente
A low-charging bag is useful only when its intended limits, storage life and closure method are understood by the process owner.
Ordinary polyethylene can charge strongly during handling.The low-charging formulation reduces triboelectric generation under normal use.
Operators confuse low-charging bags with shielding packaging.The pink color and process labeling distinguish EPA-use packaging from silver shielding bags.
Contents must be checked without opening every pouch.Transparent film preserves visual and barcode identification.
Repeated tape closure contaminates the package edge.The integrated zipper provides a clean reusable closure.
Antistatic performance can decline with age or unsuitable storage.Date-controlled inventory and periodic verification support timely replacement.
Aplicações típicas
Component kitting within an EPA.Line-side organization of non-exposed parts.Short-term storage of fixtures and consumables.Assembly work-in-process identification.Packaging of non-sensitive items entering an ESD area.Internal handling where electrostatic shielding is not required.
Parâmetros técnicos
The representative product is a 4 mil pink low-charging polyethylene zipper bag. This type is intended primarily for controlled use inside an EPA and is not represented as a substitute for a shielding bag where discharge shielding is required.
| Material principal | Low-density polyethylene with a low-charging antistatic formulation |
|---|---|
| Painel de espessura | 0.076-0.102 mm representative film thickness |
| Largura efetiva | 50-600 mm available internal bag width |
| Comprimento máximo | Up to 900 mm finished bag length |
| Aço enfrentando espessura | Not applicable; 0 mm steel facing |
| Densidade Core | 910-940 kg/m³ representative low-density polyethylene range |
| Condutividade térmica | 0.30-0.45 W/(m·K) representative polyethylene film range |
| Superfície acabado | Smooth transparent light-pink low-charging film with optional ESD marking |
| Tipo conjunto | Heat-welded side and bottom seams with integral press-to-close zipper |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Zipper-top or open heat-seal format.Printed or unprinted pink film.Standard and custom bag sizes.3 mil, 4 mil or heavier film.Permanent dissipative clear barrier alternative.Custom label panel and traceability marking.Shielding-bag upgrade for transport outside the EPA.
Planning a ESD Packaging Bag specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
