Three-quarter view of transparent pink low-charging ESD packaging bag

Produk ESD dan Antistatik

Tas Kemasan ESD

The ESD Packaging Bag is a transparent pink low-charging polyethylene pouch for organizing non-shielding component packages inside controlled ESD work areas.

Low-charging polyethylene reduces triboelectric charge generation during routine handling.
Transparent pink film allows labels and components to remain visible.
Resealable zipper supports repeated transfers within an ESD protected area.

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The pouch is formed from light-pink low-density polyethylene with an antistatic formulation and a smooth interior surface. It is intended for routine organization, kitting and short-term movement within a protected environment where discharge shielding is not required. Heat-welded side seams and an integral zipper provide a lightweight reusable closure. The film remains transparent enough for barcode, label and content inspection.

Fitur utama:

Low-charging polyethylene limits charge generation during contact and separation.

Light-pink identification distinguishes the bag from ordinary clear packaging.

Transparent film keeps component labels visible.

Integral zipper enables repeated opening without a separate fastener.

Flexible film conforms around small parts and kits.

Wide welded edges reduce seam splitting during normal handling.

Multiple bag sizes support organized line-side inventory.

Kekhawatiran produk pelanggan

A low-charging bag is useful only when its intended limits, storage life and closure method are understood by the process owner.

Ordinary polyethylene can charge strongly during handling.The low-charging formulation reduces triboelectric generation under normal use.

Operators confuse low-charging bags with shielding packaging.The pink color and process labeling distinguish EPA-use packaging from silver shielding bags.

Contents must be checked without opening every pouch.Transparent film preserves visual and barcode identification.

Repeated tape closure contaminates the package edge.The integrated zipper provides a clean reusable closure.

Antistatic performance can decline with age or unsuitable storage.Date-controlled inventory and periodic verification support timely replacement.

Aplikasi yang Tipis

Component kitting within an EPA.Line-side organization of non-exposed parts.Short-term storage of fixtures and consumables.Assembly work-in-process identification.Packaging of non-sensitive items entering an ESD area.Internal handling where electrostatic shielding is not required.

Parameter teknis

The representative product is a 4 mil pink low-charging polyethylene zipper bag. This type is intended primarily for controlled use inside an EPA and is not represented as a substitute for a shielding bag where discharge shielding is required.

Bahan inti	Low-density polyethylene with a low-charging antistatic formulation
Ketebalan Panel (Panel Thickness)	0.076-0.102 mm representative film thickness
Efektif lebar	50-600 mm available internal bag width
Panjang maksimum	Up to 900 mm finished bag length
Baja menghadap ketebalan	Not applicable; 0 mm steel facing
Kepadatan inti (core density)	910-940 kg/m³ representative low-density polyethylene range
Konduktivitas Termal (Thermal Conductivity)	0.30-0.45 W/(m·K) representative polyethylene film range
Permukaan selesai	Smooth transparent light-pink low-charging film with optional ESD marking
Jenis Bersama	Heat-welded side and bottom seams with integral press-to-close zipper
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Zipper-top or open heat-seal format.Printed or unprinted pink film.Standard and custom bag sizes.3 mil, 4 mil or heavier film.Permanent dissipative clear barrier alternative.Custom label panel and traceability marking.Shielding-bag upgrade for transport outside the EPA.

Planning a ESD Packaging Bag specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami