Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Produits ESD et antistatiques
sac d'emballage ESD par
The ESD Packaging Bag is a transparent pink low-charging polyethylene pouch for organizing non-shielding component packages inside controlled ESD work areas.
- Low-charging polyethylene reduces triboelectric charge generation during routine handling.
- Transparent pink film allows labels and components to remain visible.
- Resealable zipper supports repeated transfers within an ESD protected area.
Introduction de produit
The pouch is formed from light-pink low-density polyethylene with an antistatic formulation and a smooth interior surface. It is intended for routine organization, kitting and short-term movement within a protected environment where discharge shielding is not required. Heat-welded side seams and an integral zipper provide a lightweight reusable closure. The film remains transparent enough for barcode, label and content inspection.
Key Features
Light-pink identification distinguishes the bag from ordinary clear packaging.
Transparent film keeps component labels visible.
Integral zipper enables repeated opening without a separate fastener.
Flexible film conforms around small parts and kits.
Wide welded edges reduce seam splitting during normal handling.
Multiple bag sizes support organized line-side inventory.
Préoccupations du client produit
A low-charging bag is useful only when its intended limits, storage life and closure method are understood by the process owner.
Ordinary polyethylene can charge strongly during handling.The low-charging formulation reduces triboelectric generation under normal use.
Operators confuse low-charging bags with shielding packaging.The pink color and process labeling distinguish EPA-use packaging from silver shielding bags.
Contents must be checked without opening every pouch.Transparent film preserves visual and barcode identification.
Repeated tape closure contaminates the package edge.The integrated zipper provides a clean reusable closure.
Antistatic performance can decline with age or unsuitable storage.Date-controlled inventory and periodic verification support timely replacement.
Les applications typiques
Component kitting within an EPA.Line-side organization of non-exposed parts.Short-term storage of fixtures and consumables.Assembly work-in-process identification.Packaging of non-sensitive items entering an ESD area.Internal handling where electrostatic shielding is not required.
Paramètres techniques
The representative product is a 4 mil pink low-charging polyethylene zipper bag. This type is intended primarily for controlled use inside an EPA and is not represented as a substitute for a shielding bag where discharge shielding is required.
| Matériaux de base | Low-density polyethylene with a low-charging antistatic formulation |
|---|---|
| Panneau épaisseur | 0.076-0.102 mm representative film thickness |
| Largeur effective | 50-600 mm available internal bag width |
| Longueur maximale | Up to 900 mm finished bag length |
| Acier face épaisseur | Not applicable; 0 mm steel facing |
| Densité Core | 910-940 kg/m³ representative low-density polyethylene range |
| Conductivité thermique | 0.30-0.45 W/(m·K) representative polyethylene film range |
| surface finie | Smooth transparent light-pink low-charging film with optional ESD marking |
| Type joint | Heat-welded side and bottom seams with integral press-to-close zipper |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Zipper-top or open heat-seal format.Printed or unprinted pink film.Standard and custom bag sizes.3 mil, 4 mil or heavier film.Permanent dissipative clear barrier alternative.Custom label panel and traceability marking.Shielding-bag upgrade for transport outside the EPA.
Planning a ESD Packaging Bag specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
