Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
FFU e equipamento de purificação de ar terminal
Unidade de filtro de ventilador (EFU)
A compact custom-format filtration module designed for direct integration into semiconductor tools, enclosures and production equipment with restricted internal space.
- Ultra-Compact Tool Integration
- Custom Footprint and Connector
- Low-Vibration EC Fan
- HEPA or ULPA Mini-Pleat
Introdução do produto
The equipment fan filter unit is engineered as part of a process tool rather than as a ceiling tile. Its shallow aluminium enclosure carries slim EC centrifugal fans beside or above a low-depth HEPA or ULPA mini-pleat panel, leaving more usable space inside the machine. Mounting holes, cable connectors, airflow direction and service access can be arranged around the tool frame. Low-vibration fan isolation and a rigid filter support help protect stages, sensors and precision transport mechanisms located immediately downstream of the clean-air module.
Características-chave
Mounting datum holes and electrical connectors can align directly with the process-tool chassis.
Elastomer fan isolators reduce vibration transfer into metrology stages and precision handling mechanisms.
Top, side or downward airflow orientation permits the same filtration principle to follow the equipment layout.
Preocupações do produto do cliente
Process equipment has tighter space, vibration and interface constraints than a room ceiling, so a generic FFU rarely fits without compromise.
A standard 300 mm FFU consumes the service space required above a compact semiconductor tool.A slim fan array and low-depth mini-pleat filter reduce the installed module height.
Field-drilled mounting holes create misalignment and metal debris inside new equipment.Tool-specific datum holes and brackets are manufactured into the EFU housing before assembly.
Fan vibration disturbs imaging, alignment or robotic positioning accuracy.Balanced EC impellers and elastomer isolation mounts separate rotating components from the machine frame.
A generic connector or airflow direction conflicts with existing tool wiring and internal ducts.Cable interface, controller position and outlet orientation are configured around the equipment architecture.
Aplicações típicas
Wafer processing equipmentFlat-panel display toolsLithium battery production machinesSMT and electronics enclosuresPrecision optical inspection systems
Parâmetros técnicos
Representative material and dimensional ranges for a process-tool EFU are provided below.
| Material principal | Slim EC centrifugal fan array with low-depth micro-glass HEPA or ULPA mini-pleat filter |
|---|---|
| Painel de espessura | 100-250 mm overall equipment-module depth |
| Largura efetiva | 300-1200 mm active filtration width |
| Comprimento máximo | Up to 1800 mm custom equipment length |
| Aço enfrentando espessura | 0.8-1.2 mm aluminium or stainless-steel equipment housing |
| Densidade Core | Approximately 90-120 kg/m³ compacted density of the mini-pleat pack integrated into the equipment FFU |
| Condutividade térmica | Approximately 0.035-0.043 W/(m·K) for the compact micro-glass pack used in the equipment FFU |
| Superfície acabado | Clear anodized aluminium or brushed 304 stainless steel with blue low-voltage control module |
| Tipo conjunto | Tool-specific bolted flange with elastomer isolation pads and gasketed filter cassette |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
70-250 mm low-profile construction rangeTop, side or downward dischargeHEPA H14 or ULPA U15-U16 mediaAnalogue, Modbus or equipment-I/O control
Planning a Equipment Fan Filter Unit (EFU) specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
