Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Filtros de ar e filtragem química
Cartucho de filtro químico cilíndrico
A sealed cylindrical canister packed with selected molecular media for low-leakage installation in modular baseplates and air-handling filter banks.
- High Media Packing Density
- Dual Baseplate Seals
- Modular Cylinder Bank
- Multiple Adsorbent Grades
Introdução do produto
The cylindrical cartridge places loose activated carbon, alumina or impregnated hybrid pellets inside a perforated tube with internal dust-control scrim. Its narrow annular flow path gives uniform bed depth and distributes air around the full cylinder. A moulded or metal end cap carries two resilient sealing rings that lock into a dedicated baseplate, reducing bypass without field-applied sealant. Individual cartridges can be replaced or refilled while the supporting frame remains installed.
Características-chave
Dual elastomer seals isolate the cartridge from its modular mounting plate.
Internal scrim restrains carbon fines without covering the complete open face.
Common body dimensions accept different media chemistries for separate gas challenges.
Preocupações do produto do cliente
A modular canister bank must combine high adsorbent mass with repeatable sealing and manageable cartridge replacement.
Rectangular cells leave unused volume in compact housings.Closely spaced cylinders create a scalable bank with high media mass per filter section.
A loose cartridge connection allows air to bypass the adsorbent.Two resilient base seals compress against a dedicated mounting socket.
Granules settle away from the upper end during transport.Vibratory filling and retained end screens keep the packed bed uniformly full.
Different gas problems require completely different housings.A common cylinder body can be filled with VOC, acid, base or blended adsorbent media.
Aplicações típicas
Air-handler molecular filter banksAirport and traffic-fume controlMuseum environmental systemsIndustrial corrosion protectionLaboratory odour exhaust
Parâmetros técnicos
Typical dimensions and materials for a cylindrical molecular filter cartridge are listed below.
| Material principal | Activated carbon, impregnated carbon, activated alumina or hybrid molecular adsorbent |
|---|---|
| Painel de espessura | 145–210 mm nominal cartridge diameter |
| Largura efetiva | 145–210 mm effective cylinder diameter |
| Comprimento máximo | 450–600 mm cartridge body length |
| Aço enfrentando espessura | 0.6–1.0 mm perforated galvanized or stainless-steel body where specified |
| Densidade Core | 420–850 kg/m³ packed adsorbent bulk density |
| Condutividade térmica | 0.09–0.35 W/(m·K) depending on carbon or alumina media |
| Superfície acabado | Corrosion-resistant moulded polymer or powder-coated perforated metal |
| Tipo conjunto | Twist-lock or compression-fit base with dual thermoplastic-elastomer gaskets |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Polymer or metal cartridge bodyVOC, acid, base or hybrid mediaRefillable or disposable formatModular galvanized or stainless baseplate
Planning a Cylindrical Chemical Filter Cartridge specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
