Three-quarter view of cylindrical chemical filter cartridge

エアフィルターと化学ろ過

円筒形の化学フィルターカートリッジ

A sealed cylindrical canister packed with selected molecular media for low-leakage installation in modular baseplates and air-handling filter banks.

High Media Packing Density
Dual Baseplate Seals
Modular Cylinder Bank
Multiple Adsorbent Grades

見積もりリクエスト製品案内

商品紹介

The cylindrical cartridge places loose activated carbon, alumina or impregnated hybrid pellets inside a perforated tube with internal dust-control scrim. Its narrow annular flow path gives uniform bed depth and distributes air around the full cylinder. A moulded or metal end cap carries two resilient sealing rings that lock into a dedicated baseplate, reducing bypass without field-applied sealant. Individual cartridges can be replaced or refilled while the supporting frame remains installed.

主要な特徴

Vibration-filled media minimizes voids and improves use of the cylinder volume.

Dual elastomer seals isolate the cartridge from its modular mounting plate.

Internal scrim restrains carbon fines without covering the complete open face.

Common body dimensions accept different media chemistries for separate gas challenges.

お客様の製品に関する懸念事項

A modular canister bank must combine high adsorbent mass with repeatable sealing and manageable cartridge replacement.

Rectangular cells leave unused volume in compact housings.Closely spaced cylinders create a scalable bank with high media mass per filter section.

A loose cartridge connection allows air to bypass the adsorbent.Two resilient base seals compress against a dedicated mounting socket.

Granules settle away from the upper end during transport.Vibratory filling and retained end screens keep the packed bed uniformly full.

Different gas problems require completely different housings.A common cylinder body can be filled with VOC, acid, base or blended adsorbent media.

典型的な用途

Air-handler molecular filter banksAirport and traffic-fume controlMuseum environmental systemsIndustrial corrosion protectionLaboratory odour exhaust

技術的なパラメータ

Typical dimensions and materials for a cylindrical molecular filter cartridge are listed below.

コア材料	Activated carbon, impregnated carbon, activated alumina or hybrid molecular adsorbent
パネルの厚さ	145–210 mm nominal cartridge diameter
有効幅	145–210 mm effective cylinder diameter
最大長さ	450–600 mm cartridge body length
鋼鉄の厚さを直面する	0.6–1.0 mm perforated galvanized or stainless-steel body where specified
コア密度	420–850 kg/m³ packed adsorbent bulk density
熱伝導率	0.09–0.35 W/(m·K) depending on carbon or alumina media
表面仕上げ	Corrosion-resistant moulded polymer or powder-coated perforated metal
ジョイントタイプ	Twist-lock or compression-fit base with dual thermoplastic-elastomer gaskets
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Polymer or metal cartridge bodyVOC, acid, base or hybrid mediaRefillable or disposable formatModular galvanized or stainless baseplate

Planning a Cylindrical Chemical Filter Cartridge specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する