English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
مرشحات الهواء والترشيح الكيميائي
خرطوشة مرشح كيميائي أسطواني
A sealed cylindrical canister packed with selected molecular media for low-leakage installation in modular baseplates and air-handling filter banks.
- High Media Packing Density
- Dual Baseplate Seals
- Modular Cylinder Bank
- Multiple Adsorbent Grades
مقدمة المنتج
The cylindrical cartridge places loose activated carbon, alumina or impregnated hybrid pellets inside a perforated tube with internal dust-control scrim. Its narrow annular flow path gives uniform bed depth and distributes air around the full cylinder. A moulded or metal end cap carries two resilient sealing rings that lock into a dedicated baseplate, reducing bypass without field-applied sealant. Individual cartridges can be replaced or refilled while the supporting frame remains installed.
الخصائص الرئيسية
Dual elastomer seals isolate the cartridge from its modular mounting plate.
Internal scrim restrains carbon fines without covering the complete open face.
Common body dimensions accept different media chemistries for separate gas challenges.
مخاوف المنتج للعملاء
A modular canister bank must combine high adsorbent mass with repeatable sealing and manageable cartridge replacement.
Rectangular cells leave unused volume in compact housings.Closely spaced cylinders create a scalable bank with high media mass per filter section.
A loose cartridge connection allows air to bypass the adsorbent.Two resilient base seals compress against a dedicated mounting socket.
Granules settle away from the upper end during transport.Vibratory filling and retained end screens keep the packed bed uniformly full.
Different gas problems require completely different housings.A common cylinder body can be filled with VOC, acid, base or blended adsorbent media.
تطبيقات نموذجية
Air-handler molecular filter banksAirport and traffic-fume controlMuseum environmental systemsIndustrial corrosion protectionLaboratory odour exhaust
المعلمات الفنية
Typical dimensions and materials for a cylindrical molecular filter cartridge are listed below.
| المواد الأساسية | Activated carbon, impregnated carbon, activated alumina or hybrid molecular adsorbent |
|---|---|
| سمك اللوحة | 145–210 mm nominal cartridge diameter |
| العرض الفعال | 145–210 mm effective cylinder diameter |
| الحد الأقصى الطول | 450–600 mm cartridge body length |
| الصلب يواجه سمك | 0.6–1.0 mm perforated galvanized or stainless-steel body where specified |
| الكثافة الأساسية | 420–850 kg/m³ packed adsorbent bulk density |
| الموصلية الحرارية | 0.09–0.35 W/(m·K) depending on carbon or alumina media |
| إنهاء السطح | Corrosion-resistant moulded polymer or powder-coated perforated metal |
| نوع المشترك | Twist-lock or compression-fit base with dual thermoplastic-elastomer gaskets |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Polymer or metal cartridge bodyVOC, acid, base or hybrid mediaRefillable or disposable formatModular galvanized or stainless baseplate
Planning a Cylindrical Chemical Filter Cartridge specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
