Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Produtos de Monitoramento Ambiental Microbiológico
Amostragem microbiana de gás comprimido
A pressure-aware sieve-impaction instrument that collects microorganisms from process gases onto agar before controlled automatic decompression.
- Under-Pressure Microbial Impaction
- Gas-Specific Flow Regulation
- Automatic Decompression
- Portable Battery Operation
Introdução do produto
The Compressed Gas Microbial Sampler connects to a regulated process-gas outlet and maintains the culture plate within a pressure-rated impaction chamber during collection. Pressure and mass-flow sensors adjust the metering path for the selected gas while a perforated lid distributes the stream over agar. Keeping impaction under pressure avoids the sudden dynamic decompression that can injure microorganisms and produce false-low recovery. After the programmed normal-liter volume is reached, the unit performs a controlled decompression step before the chamber is opened.
Características-chave
Gas-specific mass-flow correction supports compressed air, nitrogen, carbon dioxide and argon.
Automatic pressure measurement, flow selection and decompression reduce manual valve errors.
A pressure hose and optional exhaust line route inlet and discharged gas safely.
Preocupações do produto do cliente
Compressed-gas monitoring must reduce pressure without damaging organisms, miscalculating gas volume or discharging hazardous gas into the work area.
Rapid decompression stresses captured microorganisms and can lower recovery.The culture plate remains in a pressure-rated chamber during impaction, followed by controlled decompression.
Different gas density causes inaccurate volume when one calibration is assumed.Gas selection, pressure sensing and mass-flow regulation calculate and control the appropriate normal-liter volume.
Insufficient utility flow prevents the configured 100 L/min sample rate.An automatic lower-flow mode can continue within the qualified operating configuration.
Carbon dioxide or contaminated exhaust accumulates near the operator.A dedicated exhaust connection accepts tubing for controlled discharge to a suitable location.
Aplicações típicas
Pharmaceutical compressed airNitrogen blanketing systemsCarbon dioxide process supplyArgon and other validated utility gases
Parâmetros técnicos
Typical materials and dimensions for a portable pressure-regulated microbial gas sampler are listed below.
| Material principal | High-performance molded polymer body with anodized aluminum or stainless pressure chamber |
|---|---|
| Painel de espessura | 180-220 mm body depth |
| Largura efetiva | 180-230 mm instrument width |
| Comprimento máximo | Up to 500 mm overall height including handle and chamber |
| Aço enfrentando espessura | 1.0-2.0 mm pressure-chamber and fitting walls |
| Densidade Core | 1050-8000 kg/m³ across polymer body and metal pressure components |
| Condutividade térmica | 0.12-17 W/(m·K) across polymer body and stainless components |
| Superfície acabado | Dark navy cleanable polymer with satin stainless pressure chamber, black glass and teal indicators |
| Tipo conjunto | Pressure-rated PTFE inlet hose, 3/8 inch fitting, mini tri-clamp chamber and regulated exhaust connector |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
50 or 100 L/min sampling headCompressed air, nitrogen, carbon dioxide or argon programExhaust tubing setBarcode and secure data-management functions
Planning a Compressed Gas Microbial Sampler specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
