English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
منتجات المراقبة البيئية الميكروبيولوجية
غاز مضغوط عينة الميكروبات
A pressure-aware sieve-impaction instrument that collects microorganisms from process gases onto agar before controlled automatic decompression.
- Under-Pressure Microbial Impaction
- Gas-Specific Flow Regulation
- Automatic Decompression
- Portable Battery Operation
مقدمة المنتج
The Compressed Gas Microbial Sampler connects to a regulated process-gas outlet and maintains the culture plate within a pressure-rated impaction chamber during collection. Pressure and mass-flow sensors adjust the metering path for the selected gas while a perforated lid distributes the stream over agar. Keeping impaction under pressure avoids the sudden dynamic decompression that can injure microorganisms and produce false-low recovery. After the programmed normal-liter volume is reached, the unit performs a controlled decompression step before the chamber is opened.
الخصائص الرئيسية
Gas-specific mass-flow correction supports compressed air, nitrogen, carbon dioxide and argon.
Automatic pressure measurement, flow selection and decompression reduce manual valve errors.
A pressure hose and optional exhaust line route inlet and discharged gas safely.
مخاوف المنتج للعملاء
Compressed-gas monitoring must reduce pressure without damaging organisms, miscalculating gas volume or discharging hazardous gas into the work area.
Rapid decompression stresses captured microorganisms and can lower recovery.The culture plate remains in a pressure-rated chamber during impaction, followed by controlled decompression.
Different gas density causes inaccurate volume when one calibration is assumed.Gas selection, pressure sensing and mass-flow regulation calculate and control the appropriate normal-liter volume.
Insufficient utility flow prevents the configured 100 L/min sample rate.An automatic lower-flow mode can continue within the qualified operating configuration.
Carbon dioxide or contaminated exhaust accumulates near the operator.A dedicated exhaust connection accepts tubing for controlled discharge to a suitable location.
تطبيقات نموذجية
Pharmaceutical compressed airNitrogen blanketing systemsCarbon dioxide process supplyArgon and other validated utility gases
المعلمات الفنية
Typical materials and dimensions for a portable pressure-regulated microbial gas sampler are listed below.
| المواد الأساسية | High-performance molded polymer body with anodized aluminum or stainless pressure chamber |
|---|---|
| سمك اللوحة | 180-220 mm body depth |
| العرض الفعال | 180-230 mm instrument width |
| الحد الأقصى الطول | Up to 500 mm overall height including handle and chamber |
| الصلب يواجه سمك | 1.0-2.0 mm pressure-chamber and fitting walls |
| الكثافة الأساسية | 1050-8000 kg/m³ across polymer body and metal pressure components |
| الموصلية الحرارية | 0.12-17 W/(m·K) across polymer body and stainless components |
| إنهاء السطح | Dark navy cleanable polymer with satin stainless pressure chamber, black glass and teal indicators |
| نوع المشترك | Pressure-rated PTFE inlet hose, 3/8 inch fitting, mini tri-clamp chamber and regulated exhaust connector |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
50 or 100 L/min sampling headCompressed air, nitrogen, carbon dioxide or argon programExhaust tubing setBarcode and secure data-management functions
Planning a Compressed Gas Microbial Sampler specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
