Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Filtros de ar e filtragem química
Z Filtro HEPA antiestático para áreas perigosas
A conductive metal-frame HEPA filter with antistatic media support and an accessible bonding point for ventilation systems handling potentially combustible dust or vapour environments.
- Conductive Metal Frame
- External Bonding Point
- Antistatic Media Support
- Robust Box Construction
Introdução do produto
The antistatic HEPA filter for hazardous areas uses a conductive galvanized-steel or stainless-steel box frame, electrically continuous faceguards and a dedicated bonding lug. Glass-microfibre or membrane media is supported by conductive separators or antistatic grids so charge can dissipate through the frame when the filter is correctly earthed in its housing. Continuous pack potting and a conductive or compatible closed-cell gasket control bypass. The construction is intended for engineered dust-control and process-exhaust systems where electrostatic-charge management forms part of the overall hazard-control design.
Características-chave
A visible external earth lug allows the installed filter to be connected to the housing bonding network.
Conductive separators or antistatic support grids reduce isolated charge accumulation around the media pack.
A rigid deep box frame protects the HEPA element from vibration and handling in industrial exhaust equipment.
Preocupações do produto do cliente
In a potentially explosive atmosphere, a filter must control fine particles without becoming an electrically isolated component in the ventilation path.
A plastic or isolated frame can accumulate electrostatic charge in a dry dust stream.Conductive metal construction and an external bonding lug provide a deliberate discharge path when correctly installed.
The media faceguard is conductive but not electrically connected to the main frame.Bonded faceguards and conductive supports maintain continuity across the filter assembly.
Industrial vibration loosens a lightweight terminal-panel frame.A reinforced box frame and securely potted pack suit ducted process-exhaust housings.
Operators cannot visually confirm where the filter should be earthed.A clearly accessible bonding stud provides an identifiable connection point on the frame.
Aplicações típicas
Combustible-dust extraction afterfiltrationSolvent-process exhaust systemsPowder-handling containment equipmentBattery-material production ventilationHazardous-area clean manufacturing
Parâmetros técnicos
Representative conductive construction ranges for an antistatic hazardous-area HEPA filter are listed below.
| Material principal | Glass-microfibre or membrane HEPA media with conductive separators or antistatic support grid |
|---|---|
| Painel de espessura | Profundidade total do filtro 150 - 292 mm |
| Largura efetiva | 305 - 610 mm Largura nominal da face |
| Comprimento máximo | Up to 762 mm nominal face height |
| Aço enfrentando espessura | 0.8–1.2 mm galvanized-steel or stainless-steel conductive frame |
| Densidade Core | Approximately 42–68 kg/m³ equivalent antistatic packed-media density |
| Condutividade térmica | Approximately 0.035–0.045 W/(m·K) for the dry filter media pack |
| Superfície acabado | Bare galvanized steel or clean conductive stainless steel with bonded faceguards |
| Tipo conjunto | Conductive gasket or compatible closed-cell gasket with external equipotential-bonding lug |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
H13 or H14 filter mediaGalvanized-steel or stainless-steel frameConductive gasket or standard closed-cell gasketUpstream and downstream bonded faceguards
Planning a Antistatic HEPA Filter for Hazardous Areas specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
